| 湿法纺聚丙烯腈纤维的截面形貌与皮芯结构的研究 |
| |
| 引用本文： | 葛曷一,王成国,陈娟,刘建军. 湿法纺聚丙烯腈纤维的截面形貌与皮芯结构的研究[J]. 材料导报, 2007, 21(3): 150-152 |
| |
| 作者姓名： | 葛曷一 王成国 陈娟 刘建军 |
| |
| 作者单位： | 山东大学材料科学与工程学院碳纤维中心,济南,250061;济南大学材料科学与工程学院,济南,250022;山东大学材料科学与工程学院碳纤维中心,济南,250061 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 利用电子探针、扫描电镜研究了聚丙烯腈在湿法纺丝工艺中的横截面形貌与皮芯结构.结果表明凝固浴温度会影响初生纤维的横截面形貌与芯部结构.在较高的凝固浴浓度下,较高的凝固浴温度可使双扩散速率增加,扩散比较充分,纤维横截面形状趋于圆形,芯部空洞减少,密度提高,其原丝具有较优的物理机械性能.原丝扫描电镜分析证实,原丝为皮芯多层结构组织.
|
| 关 键 词： | PAN 截面形貌 皮芯结构 芯部 |
Study on the Cross Section Morphology and Skin-core Structure of PAN Fiber in Wet-spinning |
| |
| GE Heyi,WANG Chengguo,CHEN Juan,LIU Jianjun. Study on the Cross Section Morphology and Skin-core Structure of PAN Fiber in Wet-spinning[J]. Materials Review, 2007, 21(3): 150-152 |
| |
| Authors: | GE Heyi WANG Chengguo CHEN Juan LIU Jianjun |
| |
| Affiliation: | 1 Carbon Fiber Engineering and Technology Research Center, School of Material Science and Engineering, Shandong University, Jinan 250061;2 School of Material Science and Engineering, Jinan University, Jinan 250022 |
| |
| Abstract: | The cross section morphology and skin-core structure of PAN fiber in wet-spinning are analyzed by the means of electron probe microanalyser (EPMA) and scanning electron microscope (SEM).It is found that the temperatures of coagulation baths would greatly influence the cross section and skin-core texture of PAN fiber. With high concentration of coagulation baths, the higher temperature increases the rate of counterdiffusion, which leads to circular cross section, reduction of defects in the core and better properties of PAN precursor. Meanwhile, the cross section of PAN precursor fiber with multi-layer morphology has an obvious skin-core structure. |
| |
| Keywords: | PAN |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
