| 组合式冲击钻机工作性能及成桩质量研究 |
| |
| 引用本文： | 程万里,黄明奎,牛新立. 组合式冲击钻机工作性能及成桩质量研究[J]. 建筑技术, 2012, 43(8): 746-748 |
| |
| 作者姓名： | 程万里 黄明奎 牛新立 |
| |
| 作者单位： | 1. 重庆交通大学土木建筑学院,400074,重庆
2. 保定宝钻机械制造有限公司,071100,河北保定 |
| |
| 摘 要： | ZZ-6A冲击式钻机通过中空阶梯钻头冲击钻进和捞渣桶排渣实现高效成孔,但在成桩时较为笨重并伴有桩底沉渣过厚的缺陷;简易式冲击钻机的管式钻头集掘进排渣于一体,能有效减少桩底沉渣,但又有成孔时间过长的弊端,将两种冲击钻机组合,分别实现桩孔的成孔和成桩工序,应用于砂卵石地层群桩基础施工,提高施工效率的同时也有效减少了桩底沉渣。
|
| 关 键 词： | 中空阶梯钻头 冲击钻机 桩底沉渣 组合式冲击钻机 灌注桩 |
RESEARCH ON PERFORMANCE AND PILE-FORMING QUALITY OF COMBINED HAMMER DRILL |
| |
| CHENG Wan-li , HUANG Ming-kui , NIU Xin-li. RESEARCH ON PERFORMANCE AND PILE-FORMING QUALITY OF COMBINED HAMMER DRILL[J]. Architecture Technology, 2012, 43(8): 746-748 |
| |
| Authors: | CHENG Wan-li HUANG Ming-kui NIU Xin-li |
| |
| Affiliation: | 1.School of Civil Engineering ＆ Architecture, Chongqing Jiaotong University, 400074,Chongqing 2.Baoding Baozuan Machinery Manufacturing, 071100, Baoding, Hebei, China) |
| |
| Abstract: | ZZ-6A hammer drill uses hollow multiple-diameter drill for percussive drilling and bucket grab for slag discharge to realize high hole-forming efficiency, but pile forming course is complex and slag deposition at pile bottom is over thick; although the tubular drill of simplified hammer drill integrating excavation and slag discharge could reduce slag deposition at pile bottom, it spends over long time for hole forming. Therefore, the two hammer drills are combined together to realize hole-forming and pile-forming sequence and to be used in construction of group pile foundation on sand and pebble stratum. In this way, not only construction efficiency is improved, but also slag deposition at pile bottom is obviously reduced. |
| |
| Keywords: | hollow multiple diameter drill hammer drill slag deposition at pile bottom combined hammer drill filling pile |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
