| 高压电器环氧树脂浇注成型工艺及模具设计 |
| |
| 引用本文： | 王晓梅,程晓宇,樊百虎.高压电器环氧树脂浇注成型工艺及模具设计[J].模具技术,2012(5):31-34. |
| |
| 作者姓名： | 王晓梅 程晓宇 樊百虎 |
| |
| 作者单位： | 1. 陕西国防工业职业技术学院 汽车分院,陕西 西安,710302
2. 西光模具公司,陕西 西安,710032 |
| |
| 基金项目： | 陕西省教育厅2012年科学研究项目 |
| |
| 摘 要： | 目前高压电器对浇注绝缘的要求越来越高,环氧树脂浇注成型工艺及模具设计是一门综合性的技术,包括浇注工艺方法、模具设计制造技术等,每个环节都会影响浇注件的质量。提出了相关工艺方法,模具设计关键技术。结果表明,成型零件精度可完全达到设计技术要求,且成本低,经济效益好。
|
| 关 键 词： | 高压电器 环氧树脂 成型工艺 模具设计 |
Process and mould design of high voltage electrical apparatus casting with epoxy resin |
| |
| WANG Xiao-mei
,
CHENG Xiao-yu
,
FAN Bai-hu.Process and mould design of high voltage electrical apparatus casting with epoxy resin[J].Die and Mould Technology,2012(5):31-34. |
| |
| Authors: | WANG Xiao-mei CHENG Xiao-yu FAN Bai-hu |
| |
| Affiliation: | WANG Xiao-mei, CHENG Xiao--yu, FAN Bai-hu |
| |
| Abstract: | With the increasingly demand for insulation in casting for high voltage electrical apparatus, epoxy resin casting mould design and process became to be a comprehensive tech- nology including casting method, mould design and manufacturing technology and so on, each of which can impact the quality of casting parts. Relevant process and key point of mould design was put forward. The result shows that parts in this process totally meet the accuracy demand with low cost and good economic returns. |
| |
| Keywords: | high voltage electrical apparatus epoxy resin forming process mould design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
