| 舰载铸铝密闭机柜优化分析 |
| |
| 引用本文： | 张磊,赵希芳. 舰载铸铝密闭机柜优化分析[J]. 电子机械工程, 2010, 26(4): 35-37 |
| |
| 作者姓名： | 张磊 赵希芳 |
| |
| 作者单位： | 海军驻南京地区电子设备军事代表室,江苏,南京,210039;南京电子技术研究所,江苏,南京,210039 |
| |
| 摘 要： | 刚强度/重量比最优是舰载铸铝密闭机柜的设计目标。为满足设计要求,对机柜进行了结构优化分析。采用拓扑优化方法确定了机柜加强筋布局;通过手工优化和有限元刚强度分析计算,确定了加强筋截面参数、板厚等具体设计参数。结果表明该机柜动态特性可满足设计要求。
|
| 关 键 词： | 结构优化 拓扑优化 刚强度 |
Optimization Analysis for Marine Aluminum-Mould Airtight Cabinet |
| |
| ZHANG Lei and ZHAO Xi-fang. Optimization Analysis for Marine Aluminum-Mould Airtight Cabinet[J]. Electro-Mechanical Engineering, 2010, 26(4): 35-37 |
| |
| Authors: | ZHANG Lei and ZHAO Xi-fang |
| |
| Affiliation: | ZHANG Lei1,ZHAO Xi-fang2(1.Naval Representative Office for Military Facliltiesz in Naning Aera,Nanjing 210039,China)(2.Nanjing Research Institute of Electronics Technology,China) |
| |
| Abstract: | The best ratio of stiffness and strength/weight is the design aim of the marine aluminum-mould airtight cabinet.The cabinet structure optimization was analyzed.The method of structural topology optimization was used to obtain the best layout of framework,and the design parameters were confirmed through manual adjustment and stiffness and strength analysis.The optimization structure was obtained,and the result indicates that the characteristics of the cabinet meet the design requirement. |
| |
| Keywords: | structural optimization topology optimization stiffness and strength |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《电子机械工程》浏览原始摘要信息 |
|
点击此处可从《电子机械工程》下载全文 |
