| 斜齿轮轴齿面激光熔覆过程中温度场的数值分析 |
| |
| 引用本文： | 陈列,古成中,谢沛霖.斜齿轮轴齿面激光熔覆过程中温度场的数值分析[J].中国激光,2011(3). |
| |
| 作者姓名： | 陈列 古成中 谢沛霖 |
| |
| 作者单位： | 海军工程大学机械工程系; |
| |
| 基金项目： | 国防科技重点实验室基金(51489040104JB1101); 湖北省自然科学基金(2005ABA065)资助课题 |
| |
| 摘 要： | 对某汽轮机滑油泵转子的斜齿轮轴齿面的激光熔覆过程进行了研究,利用有限元软件ANSYS对其温度场进行了数值分析。结果表明,在齿面激光熔覆过程中,激光能量输入产生的热量大量集中在轮齿内部,且在熔覆层与齿根结合部位等温线分布比较密集,导致在轮齿内部出现较大的温度梯度,且激光输入产生的热量可对相邻轮齿产生预热的效果;计算结果还表明,越靠近齿顶,等温线越深入基体,若将轮齿的侧面和顶部同时熔覆,极易造成齿顶的过度熔化而塌陷。根据计算结果,提出了齿侧与齿顶分步熔覆的工艺,通过实际熔覆实验,在轮齿表面获得了连续、完整的熔覆层。
|
| 关 键 词： | 激光技术 激光熔覆 数值分析 斜齿轮轴 温度场 |
Numerical Analysis of Temperature Field in Laser Cladding on Tooth Surface of Helical Gear Shaft |
| |
| Chen Lie Gu Chengzhong Xie Peilin.Numerical Analysis of Temperature Field in Laser Cladding on Tooth Surface of Helical Gear Shaft[J].Chinese Journal of Lasers,2011(3). |
| |
| Authors: | Chen Lie Gu Chengzhong Xie Peilin |
| |
| Affiliation: | Chen Lie Gu Chengzhong Xie Peilin(Department of Mechanical Engineering,Naval University of Engineering,Wuhan,Hubei 430033,China) |
| |
| Abstract: | The laser cladding process on tooth surface of a helical gear shaft which is the rotor in lubricant pump of steam turbine is investigated.Temperature field is numerically simulated with finite element analysis software-ANSYS.Calculation results show that the heat caused by laser energy is concentrated inside the tooth mostly,and the distribution of isothermal lines is very dense at the binding site of clad coating and tooth root.Large temperature gradient would be generated inside the tooth.In addition,an e... |
| |
| Keywords: | laser technique laser cladding numerical analysis helical gear shaft temperature field |
| 本文献已被 CNKI 等数据库收录！ |
|
