| N80-1外加厚油管一次成形加厚端性能分析 |
| |
| 引用本文： | 王国正,张朋举,赵杨民,张德松,李建军,周长英. N80-1外加厚油管一次成形加厚端性能分析[J]. 钢管, 2011, 0(4): 6-9 |
| |
| 作者姓名： | 王国正 张朋举 赵杨民 张德松 李建军 周长英 |
| |
| 作者单位： | 1. 西安交通大学,陕西西安710049;中国石油吐哈油田分公司机械厂,新疆哈密839009
2. 中国石油吐哈油田分公司机械厂,新疆哈密,839009 |
| |
| 摘 要： | 采用材料分析方法对一次成形的N80-1外加厚油管加厚端进行硬度、显微组织观测,室温拉伸、夏比冲击试验及断口SEM扫描检测.通过对比管体母材与加厚端材料的性能,验证了采用一次成形工艺可以生产符合API Spec 5CT标准要求的N80-1外加厚油管,同时,提出了外加厚油管一次成形后应对加厚端进行高温回火热处理的建议.
|
| 关 键 词： | 外加厚油管 二次加热 一次成形 性能 高温回火 |
Property Analysis of One Pass-formed Upset End of N80-1 Externally-upset Tubing |
| |
| Wang Guozheng,Zhang Pengju,Zhao Yangmin,Zhang Desong,Li Jianjun,Zhou Changying. Property Analysis of One Pass-formed Upset End of N80-1 Externally-upset Tubing[J]. Steel Pipe, 2011, 0(4): 6-9 |
| |
| Authors: | Wang Guozheng Zhang Pengju Zhao Yangmin Zhang Desong Li Jianjun Zhou Changying |
| |
| Affiliation: | Wang Guozheng1,2,Zhang Pengju2,Zhao Yangmin2,Zhang Desong2,Li Jianjun2,Zhou Changying2 |
| |
| Abstract: | The properties of the one pass-formed upset end of the N80-1 externally-upset tubing are analyzed by means of such methods as hardness test,microstructure test,ambient temperature tensile test,charpy impact test and SEM notch scanning,etc. The properties of the base material of the pipe body and those of the material of the upset tube end are compared,and with the comparison result it is verified that the one pass-formation process is capable of producing the N80-1 externally-upset tubing as conforming to t... |
| |
| Keywords: | Externally-upset tubing Secondary heating One pass-formation Properties Hi-temperature tempering |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
