首页 | 本学科首页   官方微博 | 高级检索  
     

基于Q-MMIC技术的W波段低成本PIN管开关
引用本文:许正彬,徐杰,钱澄.基于Q-MMIC技术的W波段低成本PIN管开关[J].红外与毫米波学报,2015,34(6):680-683.
作者姓名:许正彬  徐杰  钱澄
作者单位:东南大学 毫米波国家重点实验室,东南大学 毫米波国家重点实验室,东南大学 毫米波国家重点实验室
基金项目:东南大学毫米波国家重点实验室创新基金项目
摘    要:采用低成本方法设计了一款W波段单刀单掷开关。通过在单独加工的石英基片无源电路上安装倒装PIN管,获得了一款W波段准毫米波单片(Q-MMIC)开关。为了获得低损耗、高隔离度性能,开关设计中采用了3-D PIN管模型和电路补偿结构。测试结果表明开关在88GHz时插入损耗最小,最小值为0.5dB;在80-101 GHz频率范围内,开关导通时的插入损耗小于2 dB;在84-104 GHz频率范围内,开关隔离度大于30 dB。整个开关电路尺寸为1.5 mm× 3.0 mm。

关 键 词:准毫米波单片  开关  PIN管  W波段
收稿时间:2014/10/4 0:00:00
修稿时间:2015/9/28 0:00:00

Low cost W-band SPST PIN diode switch by Q-MMIC technology
XU Zheng-Bin,XU Jie and QIAN Cheng.Low cost W-band SPST PIN diode switch by Q-MMIC technology[J].Journal of Infrared and Millimeter Waves,2015,34(6):680-683.
Authors:XU Zheng-Bin  XU Jie and QIAN Cheng
Affiliation:State Key Laboratory of Millimeter Waves,Southeast University,State Key Laboratory of Millimeter Waves,Southeast University,State Key Laboratory of Millimeter Waves,Southeast University
Abstract:A high performance PIN diode single-pole-single-throw (SPST) switch for W-band application using a low cost approach is developed. By utilizing flip-chip PIN diodes mounted onto a separately fabricated passive circuit having a quartz substrate, a W-band quasi-monolithic millimeter-wave integrated circuit (Q-MMIC) switch is achieved. A 3-D PIN diode model and a compensation structure are adopted to acquire a low loss and high isolation switch. The measurement results show the minimum insertion loss is about 0.5 dB at 88 GHz and less than 2 dB over the frequency range of 80 to 101 GHz. The isolation is greater than 30 dB from 84 to 105 GHz. The total size of the switch is 1.5 mm× 3.0 mm.
Keywords:Q-MMIC  Switch  PIN diode  W-band
点击此处可从《红外与毫米波学报》浏览原始摘要信息
点击此处可从《红外与毫米波学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号