| 内锥面刃磨麻花钻工艺试验研究 |
| |
| 引用本文： | 戴俊平. 内锥面刃磨麻花钻工艺试验研究[J]. 现代制造工程, 2003, 0(8): 10-12 |
| |
| 作者姓名： | 戴俊平 |
| |
| 作者单位： | 陕西理工学院机电工程系,汉口723003 |
| |
| 基金项目： | 陕西省教育厅重点科研项目 |
| |
| 摘 要： | 阐述内锥面刃磨麻花钻原理及在工具磨床上进行磨削工艺试验的方法和机床的调整.通过磨削工艺试验,刃磨出合格的麻花钻,并分析和研究试验中存在的砂轮不锋利、磨削效率低、钻头发热大、易烧伤等问题
|
| 关 键 词： | 内锥面刃磨 麻花钻 刃磨参数 磨削试验 |
| 文章编号： | 1671-3133(2003)08-0010-03 |
| 修稿时间： | 2003-04-01 |
Experiment research on the inner cone grinding of twist drill |
| |
| Dai Junping. Experiment research on the inner cone grinding of twist drill[J]. Modern Manufacturing Engineering, 2003, 0(8): 10-12 |
| |
| Authors: | Dai Junping |
| |
| Affiliation: | Dai Junping |
| |
| Abstract: | Illustrates the principle of the inner cone grinding twist drills,the process of grinding experiments on the tool grinder and the adjustment of the tool grinder.Qualified twist drills are made after the experiments.In addition,the problems in the inner cone grinding experiments such as the grinding wheel is not sharp,the grinding efficiency is low,the drill become hot and gets burned easily,etc,are analyzed and discussed. |
| |
| Keywords: | Inner cone grinding method Twist drill Grinding parameter Grinding experiment |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
