| 基于ANSYS、UG的锻造成形仿真分析 |
| |
| 引用本文： | 高兴中,唐进元.基于ANSYS、UG的锻造成形仿真分析[J].锻压装备与制造技术,2007,42(6):49-51. |
| |
| 作者姓名： | 高兴中 唐进元 |
| |
| 作者单位： | 中南大学,机电工程学院,湖南,长沙,410083 |
| |
| 摘 要： | 采用ANSYS和UG软件,建立锻造成形CAE系统.对两种典型锻造工艺进行了仿真计算,模拟了坯料在锻模内的流动情况.为提高模锻件质量、制定合理的模锻成形工艺和模具设计提供了可靠的理论依据.
|
| 关 键 词： | 机械制造 工艺 模锻 数值模拟 CAE |
| 文章编号： | 1672-0121（2007）06-0049-03 |
| 收稿时间： | 2007-08-30 |
| 修稿时间： | 2007年8月30日 |
The Simulation Analysis of Forging based on ANSYS and UG Software |
| |
| GAO Xingzhong,TANG Jinyuan.The Simulation Analysis of Forging based on ANSYS and UG Software[J].China Metalforming Equipment & Manufacturing Technology,2007,42(6):49-51. |
| |
| Authors: | GAO Xingzhong TANG Jinyuan |
| |
| Abstract: | The forging CAE system has been established by use of ANSYS and UG software.The simulated calculation of the two typical kinds of forging process have been carried out with the blank flow situation in the forging process simulated, which provides reliable theory for improving die forging quality ,forming correct forging process and die design. |
| |
| Keywords: | Process Die forging Numerical simulation CAE |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
