| MDEA再生塔工艺计算 |
| |
| 引用本文： | 黄河,王玉福,王飞,党红星,邹新行. MDEA再生塔工艺计算[J]. 天津化工, 2014, 0(5): 20-22 |
| |
| 作者姓名： | 黄河 王玉福 王飞 党红星 邹新行 |
| |
| 作者单位： | 新疆石油勘察设计研究院(有限公司); |
| |
| 摘 要： | 本文基于HYSYS软件模拟结果对脱碳再生塔进行工艺计算。利用关联图法计算塔径2.0m;SPIEGEL公式计算等板高度0.36m;结合q线方程、提馏线方程、精馏线方程、平衡曲线方程计算出理论塔板数为5块。将计算结果代入HYSYS软件结果基本吻合。
|
| 关 键 词： | 再生塔 HETP 塔板数 |
The design of MDEA regeneration tower |
| |
| HUANG He,WANG Yu-fu,WANG fei,DANG Hong-xing,ZOU Xin-hang. The design of MDEA regeneration tower[J]. Tianjin Chemical Industry, 2014, 0(5): 20-22 |
| |
| Authors: | HUANG He WANG Yu-fu WANG fei DANG Hong-xing ZOU Xin-hang |
| |
| Affiliation: | (Xinjiang Petroleum Survey ＆ Engineering Institute Co., Ltd., Xinjiang Karamay 834000 China) |
| |
| Abstract: | Based on the a-ke gas field, the process of decarbonization is studied by Hysys. The result of simulation is used for designing regeneration tower. HEPT is 0.36m which is calculated by SPIEGEL equation, combining q equation, distillation line, stripping line and the curve of VLE, the number of theoretical plate is 5. when put calculation result into hysys mode, which well matched. |
| |
| Keywords: | regeneration tower HETP the number of plate |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
