首页 | 本学科首页   官方微博 | 高级检索  
     

气液并流筛板式填料压降的数值模拟
引用本文:王宏,安丽,高彦宁,尤东江. 气液并流筛板式填料压降的数值模拟[J]. 化工进展, 2013, 32(7): 1500-1505
作者姓名:王宏  安丽  高彦宁  尤东江
作者单位:中国船舶重工集团公司第七一八研究所,河北 邯郸 056027
摘    要:基于欧拉-欧拉模型,采用CFX软件对筛板式填料的气液两相并流流动进行了模拟。将模拟所得的压降与填料的出厂特性值进行了对比,发现在液气动能参数较小的情况下,两者吻合较好。分析了该流场内的速度分布和压力分布的特点,射流卷吸作用使流场内两相流体混合,但涡旋使筛板下方压强减小,射流撞击使筛板上方压强增加。对不同结构的矩形筛板式填料的压降进行研究,结果表明:筛板孔径和液相流量是影响筛板压降的重要因素,开孔直径越小,液相流量对单板压降的影响越大;上层筛孔投影与下层筛孔相交的结构更能有效降低单板压降。液相流量较大时,两个不同板间距的单板压降曲线将相交于一点,气相流量低于此交点时,板间距越小,单板压降越大;气相流量高于此交点时,则相反。

关 键 词:气液并流  筛板式填料  欧拉-欧拉模型  压降模拟  

Simulation research on pressure drop of sieve tray type packing with gas-liquid co-current flow
WANG Hong , AN Li , GAO Yanning , YOU Dongjiang. Simulation research on pressure drop of sieve tray type packing with gas-liquid co-current flow[J]. Chemical Industry and Engineering Progress, 2013, 32(7): 1500-1505
Authors:WANG Hong    AN Li    GAO Yanning    YOU Dongjiang
Affiliation:The 718th Research Institute of China Shipbuilding Industry Corporation,Handan 056027,Hebei,China
Abstract:Based on Eulerian-Eulerian multiphase model,the gas-liquid co-current flow of the sieve tray type packing was simulated by CFX. The simulation results showed that the pressure loss through single sieve tray agreed well with the manufacturer,s performance data under smaller kinetic energy factor. The characteristics of velocity and pressure distribution in the flow field were analyzed and the results showed that the mixing of gas and liquid attributed to entrainment by jets;the pressure at the bottom of packing decreased due to vortex and the pressure on the top increased because of jet impinging. The study of pressure drop of sieve tray type packing with various structures indicated that the sieve tray hole diameters and the liquid flow rates were important factors of pressure drop. With smaller hole diameters the influence of liquid flow rate on pressure drop was stronger. When projection of upper floor sieve holes intersected with lower floor sieve holes reduced the pressure drop of single sieve tray effectively. When the liquid flow rate increased,two packing pressure drop curves of various distances between sieve trays intersected at one point. When the gas flow rate was lower than the intersection point,the distance between trays became narrower and the pressure drop on the tray increased. The results showed the opposite while the gas flow was higher than the intersection point.
Keywords:gas-liquid co-current flow  sieve tray type packing  Eulerian-Eulerian model  pressure drop simulation
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《化工进展》浏览原始摘要信息
点击此处可从《化工进展》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号