| GCr15轴承钢脉冲电化学光整加工实验研究 |
| |
| 引用本文： | 郑兴华,庞桂兵,金洙吉,周锦进.GCr15轴承钢脉冲电化学光整加工实验研究[J].电加工与模具,2004(3):38-40. |
| |
| 作者姓名： | 郑兴华 庞桂兵 金洙吉 周锦进 |
| |
| 作者单位： | 1. 大连轻工业学校,辽宁大连,116023
2. 大连理工大学,辽宁大连,116024 |
| |
| 基金项目： | 大连市科技计划项目 (2 0 0 3A1GX0 61) |
| |
| 摘 要： | 对GCrl5轴承钢的脉冲电化学光整加工进行了实验研究，重点讨论了加工间隙、电流密度、脉冲参数、电解液浓度、加工温度等主要工艺参数对加工表面质量的影响规律。研究结果表明：用脉冲电化学光整加工技术加工GCrl5轴承钢能取得很好的效果，在轴承滚道光整加工中具有良好的应用前景。
|
| 关 键 词： | 轴承钢 脉冲电化学 光整加工 实验研究 工艺参数 表面质量 |
| 修稿时间： | 2004年3月4日 |
On the experiment of pulse electrochemical finishing of GCr15 |
| |
| Zheng Xinghua,et al.On the experiment of pulse electrochemical finishing of GCr15[J].Electromachining & Mould,2004(3):38-40. |
| |
| Authors: | Zheng Xinghua |
| |
| Abstract: | To apply Pulse Electrochemical Finishing (PECF) technology to the machining of bearing race,this paper studies the Pulse Electrochemical Finishing process of GCr15 steel (a kind of material often chosen for bearing ring),and especially discusses the influences on surface quality of inter-electrode gap size, current density,pulse parameter,electrolyte concentration and temperature detailedly. The results show that a high quality surface could be gotten when the GCr15 workpiece is machined by PECF. The conditions to get high quality surface include current density over a critical value,suitable pulse parameter,suitable electrolyte concentration and low electrolyte temperature. |
| |
| Keywords: | pulse electrochemical finishing GCr15 steel |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
