| 数控展成超声磨削主轴部件及驱动控制系统研制 |
| |
| 引用本文： | 丁仕燕,徐家文. 数控展成超声磨削主轴部件及驱动控制系统研制[J]. 中国机械工程, 2006, 17(20): 2106-2109 |
| |
| 作者姓名： | 丁仕燕 徐家文 |
| |
| 作者单位： | 南京航空航天大学,南京,210016 |
| |
| 摘 要： | 分析了圆柱磨轮数控展成超声磨削平行直纹面时的刀具空间位置，介绍了数控展成超声磨削成形加工机床的总体结构，论述了磨轮主轴部件设计及主轴驱动方案，实现了主轴变频调速控制系统软硬件设计。采用研制的磨轮主轴部件进行了数控展成超声磨削陶瓷直纹面工艺试验，试验结果表明主轴部件及驱动控制系统运行良好。
|
| 关 键 词： | 超声磨削 陶瓷 平行直纹面 变频调速 |
| 文章编号： | 1004-132X（2006）20-2106-04 |
| 收稿时间： | 2005-10-08 |
| 修稿时间： | 2005-10-08 |
Development of Spindle Assembly and Driving Control System for NC Generative Ultrasonic Grinding |
| |
| Ding Shiyan,Xu Jiawen. Development of Spindle Assembly and Driving Control System for NC Generative Ultrasonic Grinding[J]. China Mechanical Engineering, 2006, 17(20): 2106-2109 |
| |
| Authors: | Ding Shiyan Xu Jiawen |
| |
| Affiliation: | Nanjing University of Aeronautics and Astronautics, Nanjing, 210016 |
| |
| Abstract: | The cutter location in NC generative ultrasonic grinding process for parallel ruled surface with cylindrical grinding wheel was analyzed,the structure of NC generative ultrasonic grinding device was introduced,the design of grinding spindle assembly and the spindle's driving scheme was also introduced,system hardware and software design had been finished.Experiment of NC generative ultrasonic grinding of ceramic blade surface was carried out with the grinding spindle assembly,the experimental results show that the spindle assembly and driving control system work well. |
| |
| Keywords: | ultrasonic grinding ceramic parallel ruled surface variable frequency and variable speed |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
