| 不可压缩橡胶圆柱的空穴和分叉 |
| |
| 引用本文： | 王勇,唐立强,杨勇. 不可压缩橡胶圆柱的空穴和分叉[J]. 哈尔滨工程大学学报, 2007, 28(9): 980-984 |
| |
| 作者姓名： | 王勇 唐立强 杨勇 |
| |
| 作者单位： | 哈尔滨工程大学,建筑工程学院,黑龙江,哈尔滨,150001;哈尔滨工程大学,建筑工程学院,黑龙江,哈尔滨,150001;哈尔滨工程大学,建筑工程学院,黑龙江,哈尔滨,150001 |
| |
| 基金项目： | 黑龙江省自然科学基金 , 哈尔滨工程大学校科研和教改项目 |
| |
| 摘 要： | 利用Y.C.Gao给出的一类应变能函数,分析了不可压缩橡胶圆柱受静载荷作用时在等温条件下及有温度场分布时空穴产生的问题,给出了存在分叉解的条件,确定了外载荷与空穴半径的函数关系,研究了空穴形成时应力的分布,讨论了本构参数和温度对极限载荷和应力分布的影响.结果表明:当本构参数满足O＜n＜1时,橡胶圆柱体存在分叉解;由Neo-Hooken材料构成的圆柱体将会很稳定而不存在分叉解;本构参数n越大,材料越不容易发生孔洞化不稳定现象;温度越高,材料越不稳定.
|
| 关 键 词： | 不可压缩 橡胶圆柱 分叉 应变能函数 |
| 文章编号： | 1006-7043（2007）09-0980-05 |
| 修稿时间： | 2006-06-27 |
Cavity and bifurcation in an incompressible rubber cylinder |
| |
| WANG Yong,TANG Li-qiang,YANG Yong. Cavity and bifurcation in an incompressible rubber cylinder[J]. Journal of Harbin Engineering University, 2007, 28(9): 980-984 |
| |
| Authors: | WANG Yong TANG Li-qiang YANG Yong |
| |
| Affiliation: | College of Civil Engineering, Harbin Engineering University, Harbin 150001 ,China |
| |
| Abstract: | With the strain energy function propoesd by Y.C.Gao,the advent of cavity was analysed in the incompressible rubber cylinder subjected to static load along with the the existence of isothermal condition or temperature field.The condition under which a bifurcated solution existed was given.The relationship between external load and cavity radius was determined.The stress distribution when the cavity formed was studied.The effects of constitutive constants and the temperature on the critical load and the stress distribution were discussed.The results indicate that the rubber cylinder has a bifurcation solution when the constitutive parameter is 0
|
| |
| Keywords: | incompressibility rubber cylinder bifurcation strain energy function |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
