| 中速机连杆工艺研究及夹具设计 |
| |
| 引用本文： | 纪玉利,宋明忠,邱国才,钟琏.中速机连杆工艺研究及夹具设计[J].柴油机,2014,36(3):45-47. |
| |
| 作者姓名： | 纪玉利 宋明忠 邱国才 钟琏 |
| |
| 作者单位： | 上海齐耀发动机有限公司;七一一研究所;上海新中动力机厂; |
| |
| 摘 要： | 针对某中速机两段式连杆传统加工工艺存在的问题,通过工艺研究和夹具设计对传统加工工艺进行了改进。实际生产表明:改进后的加工工艺不仅使产品满足图纸的技术要求,而且大大提高了生产效率,降低了制造成本,符合批量生产的要求。
|
| 关 键 词： | 连杆 加工 工艺 夹具 |
| 收稿时间： | 2013/10/18 0:00:00 |
Machining Technology of Medium-speed ConnectingRod and its Grip Device Design |
| |
| Ji Yuli,Song Mingzhong,Qiu Guocai and Zhong Lian.Machining Technology of Medium-speed ConnectingRod and its Grip Device Design[J].Diesel Engine,2014,36(3):45-47. |
| |
| Authors: | Ji Yuli Song Mingzhong Qiu Guocai and Zhong Lian |
| |
| Affiliation: | Shanghai Qiyao Engine Co., Ltd., Shanghai 201108,Shanghai Marine Diesel Engine Research Institute, Shanghai 201108,Shanghai Qiyao Engine Co., Ltd., Shanghai 201108 and Shanghai Xinzhong Power Machine Plant, Shanghai 200072 |
| |
| Abstract: | Aimed at the machining of two-section connecting rods for medium-speed engine, through machining technology and grip device design, the traditional machining technology was improved. Manufacturing experiences show that the improved machining technology could not only satisfy the technical requirements of the layout, but also could greatly improve the production efficiency, reduce manufacturing cost, and meet the demand for mass production. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《柴油机》浏览原始摘要信息 |
|
点击此处可从《柴油机》下载全文 |
|
