| 循环次数对磨料流加工效果的影响 |
| |
| 引用本文： | 龚胜,宋桂珍,李元宗. 循环次数对磨料流加工效果的影响[J]. 机械管理开发, 2009, 24(2) |
| |
| 作者姓名： | 龚胜 宋桂珍 李元宗 |
| |
| 作者单位： | 太原理工大学机械工程学院,山西,太原,030024 |
| |
| 摘 要： | 主要研究循环次数对磨料流加工效果的影响.研究表明相应加工参数相同的条件下,工件的表面粗糙度值随着循环次数的增加而下降,但随着循环次数的进一步增加,粗糙度值下降的趋势减缓.
|
| 关 键 词： | 磨料流加工 循环次数 表面粗糙度 表面形貌 |
Effect of Number of Cycles on Polishing Effect in Abrasive Flow Machining |
| |
| Gong Sheng,Song Gui-zhen,Li Yuan-zong. Effect of Number of Cycles on Polishing Effect in Abrasive Flow Machining[J]. Mechanical Management and Development, 2009, 24(2) |
| |
| Authors: | Gong Sheng Song Gui-zhen Li Yuan-zong |
| |
| Affiliation: | Department of Mechanical Engineering;Taiyuan University of Technology;Taiyuan 030024;Shanxi |
| |
| Abstract: | This paper researches the infiuence of the number of cycles in Abrasive flow machining(AFM).The investigation results show that surface roughness decreasingas as the number of cycles increaing which based on the processing parameters fixed,but with the number of cycles increasing further,the downtrend of surface roughness is slowing-down. |
| |
| Keywords: | AFM |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
