| ISP技术在单片机程序升级中的应用 |
| |
| 引用本文： | 杨恒新,鲁翠侠. ISP技术在单片机程序升级中的应用[J]. 电子工程师, 2007, 33(3): 55-58 |
| |
| 作者姓名： | 杨恒新 鲁翠侠 |
| |
| 作者单位： | 1. 南京邮电大学光电工程学院,江苏省南京市,210003
2. 南京鹏力科技有限公司,江苏省南京市,210003 |
| |
| 摘 要： | 介绍了ISP(在系统编程)技术、P89LPC932单片机与ISP相关的特性,叙述了以ISP方式实现单片机系统软件升级的原理和具体实现方法。采用组合键方法使正常运行的单片机进行串口帧间隔检测初始化,上位机通过运行ZLGISP900从串口发出帧间隔信号,单片机检测到帧间隔信号后复位进入ISP状态,通过RS-232 C电缆以ISP方式实现单片机系统软件升级。给出了P89LPC932的ISP编程的具体实现电路和操作流程。
|
| 关 键 词： | 在系统编程 P89LPC932 单片机 RS-232 软件升级 |
| 修稿时间： | 2006-08-28 |
Application of ISP Technology to Software Update of MCU |
| |
| YANG Hengxin,LU Cuixia. Application of ISP Technology to Software Update of MCU[J]. Electronic Engineer, 2007, 33(3): 55-58 |
| |
| Authors: | YANG Hengxin LU Cuixia |
| |
| Abstract: | This paper introduces ISP technology,the ISP characteristics of P89LPC932 MCU,and discusses particularly the principle and realization methods of MCU application software update using ISP mode.In this system,when the combination key is pressed,the MCU application software runs serial port frame interval detection subprogram.The frame interval signal is sent from PC serial port on which ZLGISP900 is running,then when MCU detects the signal,a reset of MCU happens and then MCU comes into ISP mode,so the MCU application software can be updated through RS232 cable connection between PC and MCU.In this paper,the realization circuit and operation flow of P89LPC932 ISP mode programming is given in detail. |
| |
| Keywords: | ISP P89LPC932 MCU RS-232 software upgrade |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
