首页 | 本学科首页   官方微博 | 高级检索  
     

溶剂热法制备立方钛酸钡纳米晶
引用本文:施新宇,吴东辉.溶剂热法制备立方钛酸钡纳米晶[J].电子元件与材料,2008,27(5):25-27.
作者姓名:施新宇  吴东辉
作者单位:南通大学,化学化工学院,江苏,南通,226007
摘    要:将钛酸丁酯和适量乙醇混匀后,与氯化钡水溶液在溶剂热条件下反应制备立方钛酸钡纳米晶。结果表明:以KOH为矿化剂,r(Ba:Ti)为1.1,φ(乙醇)为25.0%和150℃反应12h,可得平均粒径为60nm左右、分散性较好的钛酸钡纳米晶。当乙醇用量增大时,产物的粒径减小,分散性降低;随着r(Ba:Ti)的增大,产物粒径减小。当r(Ba:Ti)为1.6时,产物的平均粒径可减小至35nm左右;矿化剂的种类、反应温度和反应时间对产物的形貌及晶体结构没有影响。

关 键 词:无机非金属材料  钛酸钡  纳米晶  溶剂热合成  铁电材料
文章编号:1001-2028(2008)05-0025-03
修稿时间:2008年1月19日

Cubic barium titanate nanocrystals prepared by solvothermal method
SHI Xin-yu,WU Dong-hui.Cubic barium titanate nanocrystals prepared by solvothermal method[J].Electronic Components & Materials,2008,27(5):25-27.
Authors:SHI Xin-yu  WU Dong-hui
Affiliation:SHI Xin-yu,WU Dong-hui (School of Chemistry , Chemical Engineering,Nantong University,Nantong 226007,Jiangsu Province,China)
Abstract:Cubic barium titanate nanocrystals were prepared by reaction of Ti(OC4H9)4 and C2H5OH mixture solution with BaCl2 aqueous solution under solvothermal condition. The results show that using KOH as alkaline mineralizer, r(Ba : Ti) = 1.1, φ (EtOH) = 25.0%, and the solvothermal reaction was carried out at 150 ℃ for 12 h, well dispersive barium titanate nanocrystals were obtained with average particle size about 60 nm. The product particle sizes are decreased with the increase of amount of alcohol, but the dispersity lowers. Particle sizes are decreased with the increase of mole ratio of barium to titanium, when r(Ba : Ti) = 1.6, average particle size is lowered to about 35 nm. The kind of mineralizer, reaction temperature and time have no effects on morphology and crystal structure of products.
Keywords:non-metallic inorganic material  barium titanate  nanocrystals  solvothermal synthesis  ferroelectric materials  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号