首页 | 本学科首页   官方微博 | 高级检索  
     

大型多功能热声发动机的研制及初步实验 第一部分 热声发动机的研制
引用本文:邱利民,孙大明,张武,陈国邦,甘智华,严伟林.大型多功能热声发动机的研制及初步实验 第一部分 热声发动机的研制[J].低温工程,2003(2):1-7.
作者姓名:邱利民  孙大明  张武  陈国邦  甘智华  严伟林
作者单位:浙江大学制冷与低温研究所,杭州,310027
基金项目:国家自然科学基金,全国高等学校优秀博士学位论文作者专项基金,50006011,200033,,
摘    要:设计并制作了一台大型多功能行波热声发动机,该热声发动机长4.5m,高1.25m,设计最大输入功率5kW。它不仅可以用于行波与驻波混合型热声发动机实验,还可以单独进行行波环路实验及热声发动机驱动脉管制冷机实验。该热声发动机中没有任何运动部件,同驻波热声发动机相比起振温度低、压比大,这对低品位能源的利用具有重要意义。着重介绍该热声发动机系统的研制和测量系统的组成,相关实验结果将另文介绍。

关 键 词:热声发动机  行波  热声发动机驱动脉管制冷机实验  低品位能源  测量系统  驻波  高次谐波  热声效应  声波发生器
修稿时间:2002年12月9日

STUDY OF A LARGE-SCALE MULTI-FUNCTION THERMOACOUSTIC HEAT ENGINE WITH HIGH EFFICIENCY PART Ⅰ.DESIGN AND CONSTRUCTION OF THE ENGINE
Qiu Limin Sun Daming Zhang Wu Chen Guobang Gan Zhihua Yan Weilin.STUDY OF A LARGE-SCALE MULTI-FUNCTION THERMOACOUSTIC HEAT ENGINE WITH HIGH EFFICIENCY PART Ⅰ.DESIGN AND CONSTRUCTION OF THE ENGINE[J].Cryogenics,2003(2):1-7.
Authors:Qiu Limin Sun Daming Zhang Wu Chen Guobang Gan Zhihua Yan Weilin
Abstract:A large-scale multi-function thermoacoustic Stirling heat engine has been designed and constructed.With the length and height of 4.5 meters and 1.25 meters respectively,the engine is designed to have the maximal input power of 5 000 W.It can operate in traveling wave mode with only the torus in experiment,in hybrid mode of standing wave and traveling wave with the whole engine working.It can be also used to drive a pulse-tube refrigerator.In comparison with standing-wave heat engine,it has lower onset temperature and higher pressure ratio.which is of great significance for introducing a variety of energies of low quality into thermoacoustic engines,such as solar energy,waste vapor energy and so on.This paper puts emphasis on the construction of the engine itself and the composition of the measurement system.Relevant experimental results will be presented in the following paper.
Keywords:thermoacoustic engine  traveling-wave  standing-wave
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号