首页 | 本学科首页   官方微博 | 高级检索  
     

激波探测系统传感器信号调理电路设计
引用本文:尹芳,张亚,何斌,王素金,王琨.激波探测系统传感器信号调理电路设计[J].机械,2011,38(7):68-71.
作者姓名:尹芳  张亚  何斌  王素金  王琨
作者单位:1. 中北大学机电工程学院,山西太原,030051
2. 庆安集团有限公司,陕西西安,710077
摘    要:采用压电式传感器测量激波信号时,由于其检测到的激波声压信号弱,输出为微电流,一般的信号调理电路不能满足要求,基于此问题,开展针对激波的信号调理电路的研究,该电路主要由电荷放大电路、带通滤波电路、输出放大电路等组成,其中带通滤波器的带宽设计为3~8 kHz,选用高精度单片运放OP07实现;电荷放大电路选用高阻、低偏置电流...

关 键 词:激波探测  压电式传感器  微电流  信号调理电路

Design of signal adjust circuit based on piezoeletrical sensor of shockwave detection system
YIN Fang,ZHANG Ya,HE Bin,Wang Su-jin,WANG Kun.Design of signal adjust circuit based on piezoeletrical sensor of shockwave detection system[J].Machinery,2011,38(7):68-71.
Authors:YIN Fang  ZHANG Ya  HE Bin  Wang Su-jin  WANG Kun
Affiliation:YIN Fang1,ZHANG Ya1,HE Bin1,Wang Su-jin2,WANG Kun1(1.Mechanical Engineering College,North University of China,Taiyuan 030051,China,2.QingAn Group Co.,Ltd,Xi'an 710077,China)
Abstract:In the shockwave detection,the signals that the piezoeletrical sensors detect are weak,and the output are micro current.Common signal adjust circuit can not meet the requirements.Based on this problem,the research to the adjust circuit of the shockwave detection was carried out,the circuit including the charge amplifier,bandpass filter and output amplifier circuit.Bandpass filter bandwidth is between 3KHz and 8KHz and realized by higher precision AMP OP07.Charge amplifier circuit is realized by higher resis...
Keywords:shockwave detection  piezoelectric sensor  micro current  signal adjust circuit  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号