| 连续搅拌釜式丙烯聚合反应器的模拟（Ⅰ）反应器的定态模拟 |
| |
| 引用本文： | 陈欠平,王弘轼,宋维端.连续搅拌釜式丙烯聚合反应器的模拟（Ⅰ）反应器的定态模拟[J].化学反应工程与工艺,1994(1). |
| |
| 作者姓名： | 陈欠平 王弘轼 宋维端 |
| |
| 作者单位： | 华东理工大学化学工程系 |
| |
| 摘 要： | 以实际工业装置为背景，建立了丙烯液相本体聚合连续搅拌釜式反应器的定态数学模型。通过模拟计算，考察了诸工艺参数──进料温度、进料流量、夹套冷却水人口温度和流量、丙烯蒸汽冷凝量、催化剂浓度以及反应器中的氢浓度对聚合反应釜反应结果的影响，并对其定态操作行为作了理论上的解释和分析。
|
| 关 键 词： | 聚丙烯，反应器，定态模型，模拟 |
SIMULATION OF CONTINUOUS STIRRED TANK REACTOR FOR POLYMERIZATION OF PROPENE(I)STEADY-STATE SIMULATION OF REACTOR |
| |
| ChenQianping,Wang Hongsi,Song Weiduan.SIMULATION OF CONTINUOUS STIRRED TANK REACTOR FOR POLYMERIZATION OF PROPENE(I)STEADY-STATE SIMULATION OF REACTOR[J].Chemical Reaction Engineering and Technology,1994(1). |
| |
| Authors: | ChenQianping Wang Hongsi Song Weiduan |
| |
| Abstract: | According to the background of an industrial installation,a steady-state mathematical model for continuous stirred tank reactor(CSTR )of propene liquid-phase bulk polymerization,was estabilished.By computer simulation,the influence on the reaction results of the polymerization reactor was studied under various technological parameters-the inlet temperature of feed,feed flow rate.the temperature and flow rate of cooling water in jacket,the condensed flow of propene vapor,catalyst concentration and the hydrogen concentration in the ractor.Moreover,the steady-state bahaviour of the reactor was interpreted and analvsed theoretically. |
| |
| Keywords: | Polypropylene Reactor Steady-state model Simulation |
| 本文献已被 CNKI 等数据库收录！ |
