首页 | 本学科首页   官方微博 | 高级检索  
     


Laminar mixed convection in shallow inclined driven cavities with hot moving lid on top and cooled from bottom
Affiliation:1. Department of Mechanical Engineering, University of Semnan, Semnan, Iran;2. Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 Skudai, Johor, Malaysia;3. Shanghai Key Lab of Vehicle Aerodynamics and Vehicle Thermal Management Systems, 4800 Cao An Rd., Jiading, Shanghai 201804, China;4. ENN-Tongji Clean Energy Institute of Advanced Studies, Shanghai, China
Abstract:Laminar mixed convective heat transfer in two-dimensional shallow rectangular driven cavities of aspect ratio 10 is studied numerically. The top moving lid of the cavity is at a higher temperature than the bottom wall. Computations are performed for Rayleigh numbers ranging from 105 to 107 keeping the Reynolds number fixed at 408.21, thus encompassing the dominating forced convection, mixed convection, and dominating natural convection flow regimes. The fluid Prandtl number is taken as 6 representing water. The effects of inclination of the cavity on the flow and thermal fields are investigated for inclination angles ranging from 0° to 30°. Interesting behaviours of the flow and thermal fields with increasing inclination are observed. The streamline and isotherm plots and the variation of the local and average Nusselt numbers at the hot and cold walls are presented. The average Nusselt number is found to increase with cavity inclination. The rate of increase of the average Nusselt number with cavity inclination is mild for dominating forced convection case while it is much steeper in dominating natural convection case.
Keywords:
本文献已被 ScienceDirect 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号