| 控制硬质合金粉末压制泄漏及污染的配套装置研究 |
| |
| 引用本文： | 于卓慧.控制硬质合金粉末压制泄漏及污染的配套装置研究[J].稀有金属与硬质合金,2007,35(3):14-16. |
| |
| 作者姓名： | 于卓慧 |
| |
| 作者单位： | 自贡硬质合金有限责任公司矿用合金分厂,四川,自贡,643011 |
| |
| 摘 要： | 针对硬质合金生产过程中粉末压制时容易泄漏的特点，研制出一种与双向压机相匹配的装置。实际使用情况表明，通过采用该配套装置，既能减少漏料量，又能将较少漏料及时地回收并投入再使用，从而使粉末泄漏得到了有效控制。
|
| 关 键 词： | 硬质合金生产 粉末压制 粉末泄漏 双向压机 配套装置 |
| 文章编号： | 1004-0536（2007）03-0014-03 |
| 修稿时间： | 2007-04-27 |
Development of Accessory Unit for Leak and Pollution Control during Carbide Powder Pressing |
| |
| YU Zhuo-hui.Development of Accessory Unit for Leak and Pollution Control during Carbide Powder Pressing[J].Rare Metals and Cemented Carbides,2007,35(3):14-16. |
| |
| Authors: | YU Zhuo-hui |
| |
| Affiliation: | Mining Carbide Factory of Zigong Cemented Carbide Corp, Ltd, Zigong 643011 ,China |
| |
| Abstract: | In view of potential leakage from powder compaction during carbide production,a new unit is developed matched to 2-way press. The actual performance of which showed that this unit can reduce powder leakage, and timely recover the leaked powder for reuse so as to effectively control the powder leakage. |
| |
| Keywords: | cemented carbide production powder pressing powder leakage 2-way press accessory unit |
| 本文献已被 维普 万方数据 等数据库收录！ |
