METHOD FOR DETERMINING TENSILE PROPERTIES OF REFRACTORY MATERIALS AT ELEVATED TEMPERATURES* |
| |
Authors: | Joseph R Bressman |
| |
Affiliation: | Aircraft Engine Research Laboratory Cleveland Airport Cleveland, Ohio |
| |
Abstract: | Equipment for testing ceramic materials to temperatures of 2000°F. was developed, and a method was devised for evaluating the bending stresses introduced by the test equipment. With this equipment, the tensile strength, stress-to-rupture characteristics, and modulus of elasticity of a sillimanite refractory were investigated at the Cleveland Laboratory of the National Advisory Committee for Aeronautics. The tensile strength varied from a minimum of 8000 lb. per sq. in. at 500°F. to a maximum of 19,000 lb. per sq. in. at 1800°F. Heat-treating the tensile specimens for one half hour at 1800°F. increased the tensile strength 35% at room temperature and 70% at 500°F. No increase in strength was noted at or above 1400°F. The stress-to-rupture in 1000 hours at 1600°F. was 8500 lb. per sq. in. The modulus of elasticity at room temperature was 20.3 × 106. |
| |
Keywords: | |
|
|