| 不同加载角下L形柱的承载力与延性分析 |
| |
| 引用本文： | 柯江. 不同加载角下L形柱的承载力与延性分析[J]. 陕西工学院学报, 2010, 0(1): 44-47 |
| |
| 作者姓名： | 柯江 |
| |
| 作者单位： | 陕西理工学院土木工程与建筑系,陕西汉中723001 |
| |
| 基金项目： | 陕西理工学院科研基金资助项目（SLGQD0507）. |
| |
| 摘 要： | 采用Abaqus软件建立L形柱的三维非线性有限元模型,分析了L形柱在不同加载角下的承载力与延性,计算结果与试验值符合良好,分析表明：加载角为135°时,承载力是最大的,延性良好;加载角为225°时,承载力是最小的,延性也最差;加载角为0°时,延性是最好的。
|
| 关 键 词： | 钢筋混凝土 L形柱 承载力 延性 Abaqus |
Analysis of bearing capacity and ductility of L-shaped column under different loading angles |
| |
| KE Jiang. Analysis of bearing capacity and ductility of L-shaped column under different loading angles[J]. Journal of Shaanxi Institute of Technology, 2010, 0(1): 44-47 |
| |
| Authors: | KE Jiang |
| |
| Affiliation: | KE Jiang ( Department of Civil Engineering ＆ Architecture, Shaanxi University of Technology, Hanzhong 723001, China ) |
| |
| Abstract: | By adopting the Abaqus, the beating capacity and the ductility of L-shaped column under different loading angles were calculated by b up the three dimensional finite element model of L-shaped column. The calculation results were in agreement with the experimental data. Some conclusions as follows have been reached ： it is of the maximum beating capacity and the good ductility when the loading angle is 135 degrees,which it is of the minimum beating capacity and the worst ductility when the loading angle is 225 degrees and the best ductility when the loading angle is 0 degrees. |
| |
| Keywords: | reinforced concrete L-shaped column beating capacity ductility Abaqus |
| 本文献已被 维普 等数据库收录！ |
|
