Selective etch-back and growth of InGaAs ON (100) Fe:lnP by electroepitaxy

Selective etch-back prior to growth of InGaAs islands on SiO₂-masked (100)Fe-doped InP substrates was performed by electroepitaxy. The etch-back of the substrate and the growth of the layer was done at a constant furnace temperature of 640° C by passing a direct electric current from the melt to the substrate for etch-back and from the substrate to the melt for growth. The current density used was 1 to 20 A/cm² for a period from 15 to 60 min. The isolated InP regions were of various sizes (40 × 1000μm to 3000 × 3000μm), and different geometries (narrow and wide strips, square, circular). A uniform etch-back and uniform growth with excellent surface morphology was obtained on strips as wide as 200μm and on circles withd < 500μm. For islands with wider geometry, growth as well as etch-back were uniform up to 100–200μm from the periphery with excellent surface morphology. The etch-back and growth profiles are trapezoid-shaped and are not influenced by the difference in chemical activity between crystalline planes. The orientation dependence of the etch rate was {110} > {100} > {011} > {111} B > {111} A.