| 涡旋式膨胀机数学模型及仿真研究 |
| |
| 引用本文： | 王吉岱,梁新军,杨兴华,张臻臻.涡旋式膨胀机数学模型及仿真研究[J].压缩机技术,2012(5):13-16. |
| |
| 作者姓名： | 王吉岱 梁新军 杨兴华 张臻臻 |
| |
| 作者单位： | 山东科技大学机电学院,山东青岛,266590 |
| |
| 基金项目： | 国家高技术研究发展计划项目（863计划）（2009AA052212）;山东科技大学科学研究春蕾计划项目（210az2022） |
| |
| 摘 要： | 在分析涡旋式膨胀机工作特性的基础上,从涡旋式膨胀机啮合点的角度对膨胀起始角进行了推导；将其工作形式分为进气、膨胀、排气3个过程,建立了各过程函数形式的工作腔容积计算模型.运用Fluent软件对涡旋式膨胀机的工作过程进行仿真分析,仿真结果对涡旋式膨胀机容积计算模型进行了验证.
|
| 关 键 词： | 涡旋式膨胀机 啮合点 膨胀起始角 工作腔容积 |
Mathematical Model and Simulation Study on Scroll Expander |
| |
| WANG Ji-dai
,
LIANG Xin-jun
,
YANG Xing-hua
,
ZHANG Zhen-zhen.Mathematical Model and Simulation Study on Scroll Expander[J].Compressor Technology,2012(5):13-16. |
| |
| Authors: | WANG Ji-dai LIANG Xin-jun YANG Xing-hua ZHANG Zhen-zhen |
| |
| Affiliation: | (College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266590, China) |
| |
| Abstract: | Based on the analysis of the performance characteristic of scroll expander,the starting angle of the expansion is put tbrward from the meshing point of scroll expander perspective.The working process is divided into three,which are suction, expansion and discharge respectively.The calculation model of working chamber volume including three processes is also given.The working process of scroll expander is simulated and analyzed by Fluent software and the scroll expander volueme calculation model is verified based on simulation results. |
| |
| Keywords: | scroll expander meshing point starting angle of the expansion working chamber volume |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
