| 双圆锥台壳体液压胀形的防皱措施 |
| |
| 引用本文： | 詹艳然,张哲武,王仲仁. 双圆锥台壳体液压胀形的防皱措施[J]. 塑性工程学报, 2003, 10(2): 22-24 |
| |
| 作者姓名： | 詹艳然 张哲武 王仲仁 |
| |
| 作者单位： | 1. 福州大学机械工程系,福州,350002
2. 哈尔滨工业大学,哈尔滨,150001 |
| |
| 基金项目： | 福州大学科技发展基金(XKJ(QD)-0125) |
| |
| 摘 要： | 等边双圆锥台壳体在内压的作用下,赤道环焊缝处易产生失稳起皱,且胀形后所得容器圆度较差。针对这一问题,对其胀形过程进行了有限元数值模拟,并通过改变圆锥台的初始形状,来保证容器的圆度和避免赤道处的失稳起皱。
|
| 关 键 词： | 锥台式壳体 液压胀形 数值模拟 |
| 文章编号： | 1007-2012(2003)02-0022-03 |
| 修稿时间： | 2002-07-27 |
Steps of anti-wrinkle for double frustum shell in the process of hydrobulging |
| |
| ZHAN Yan-ran ZHANG Zhe-wu. Steps of anti-wrinkle for double frustum shell in the process of hydrobulging[J]. Journal of Plasticity Engineering, 2003, 10(2): 22-24 |
| |
| Authors: | ZHAN Yan-ran ZHANG Zhe-wu |
| |
| Abstract: | Under internal pressure, equilateral frustum shell tends to wrinkle at the equator, and the circular degree of the obtained vessel is poor. Pointing to this problem, a numerical simulation was firstly carried out, and then some measures was taken to prevent the equator from wrinkling by slightly changing the shape of the frustum shell, as a result, the bulged vessel became more round. |
| |
| Keywords: | frustum shell hydrobulging numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
