首页 | 本学科首页   官方微博 | 高级检索  
     

亚甲基丁二酰氯的合成研究
引用本文:王传兴,李东阳,刘军凯,高传慧,武玉民.亚甲基丁二酰氯的合成研究[J].石油化工高等学校学报,2014(6):7-10.
作者姓名:王传兴  李东阳  刘军凯  高传慧  武玉民
作者单位:青岛科技大学化工学院
基金项目:国家自然科学基金青年基金(21306094);山东省教育厅项目(J13LD15);青岛市科技项目(13-1-4-258-jch)
摘    要:以亚甲基丁二酸(衣康酸)为原料,采用五氯化磷为酰氯化试剂,通过熔融法合成了亚甲基丁二酰氯(衣康酰氯)。研究了反应物原料配比、反应时间、反应温度等因素对产物收率和纯度的影响,并且对产物的结构进行了红外光谱和核磁氢谱的表征。结果表明,在衣康酸和五氯化磷物质的量比为1∶2.2,温度110℃的条件下反应2h,亚甲基丁二酰氯的收率可达到86%,纯度达到94%以上。

关 键 词:亚甲基丁二酰氯  衣康酸  五氯化磷  熔融

Synthesis of 2-Methylidenebutanedioyl Dichloride
Wang Chuanxing;Li Dongyang;Liu Junkai;Gao Chuanhui;Wu Yumin.Synthesis of 2-Methylidenebutanedioyl Dichloride[J].Journal of Petrochemical Universities,2014(6):7-10.
Authors:Wang Chuanxing;Li Dongyang;Liu Junkai;Gao Chuanhui;Wu Yumin
Affiliation:Wang Chuanxing;Li Dongyang;Liu Junkai;Gao Chuanhui;Wu Yumin;College of Chemical Engineering,Qingdao University of Science and Technology;
Abstract:2-methylidenebutanedioyl dichloride (Itaconyl chloride ) was synthesized using itaconic acid and phosphorus pentachloride as raw materials by melting method.The effect of raw material ratio,reaction time,temperature and other process conditions on yield of product was examined.The structure of the product was characterized by IR and ^1 H-NMR .The experiments showed that, when the itaconyl chloride and phosphorus pentachloride molar ratio was 1 ∶ 2.2, reaction temperature was 1 10 ℃ and reaction time was 2 h,the yield of 2-methylidenebutanedioyl dichloride can reach 86% and its purity was more than 94%.
Keywords:2-Methylidenebutanedioyl dichloride  Itaconic acid  Phosphorus pentachloride  Melting
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号