首页 | 本学科首页   官方微博 | 高级检索  
     

地铁齿轮箱吊座强度分析与疲劳寿命预测
引用本文:赵春青,杨建伟,王贺玺.地铁齿轮箱吊座强度分析与疲劳寿命预测[J].北京建筑工程学院学报,2015,31(3):60-64.
作者姓名:赵春青  杨建伟  王贺玺
作者单位:北京建筑大学 机电与车辆工程学院,北京,100044;北京建筑大学 机电与车辆工程学院,北京,100044;北京建筑大学 机电与车辆工程学院,北京,100044
基金项目:国家自然科学基金项目(51175028),长城学者培养计划项目(CIT&TCD20150312),北京市优秀人才培养项目(2012D005017000006)
摘    要:就地铁某转向架齿轮箱吊座的强度、刚度和疲劳寿命的相关问题,通过模拟与研究齿轮箱吊座受力情况,利用ANSYS workbench对吊座进行强度分析与疲劳寿命估计.通过对两种极限工况下的吊座进行有限元仿真模拟,经过强度分析,得到吊座的变形与应力云图,结果表明吊座满足刚度与强度要求.最后针对地铁齿轮箱吊座交变循环载荷条件,利用应力测试数据,对吊座的寿命进行预测,可为地铁齿轮箱吊座的预计维修与故障预测提供一定依据.

关 键 词:齿轮箱吊座  强度分析  疲劳寿命

Strength Analysis and Fatigue Life Prediction of the Subway Gear Box Bracket
Abstract:Through simulating and researching the force condition of gear box bracket, the strength analysis and fatigue life estimation for bracket are carried out by using ANSYS workbench, aiming at the related problems of strength, rigidity and fatigue life for subway gear box bracket. Through FEM simulation and strength analysis of bracket in two kinds of limited conditions, the deformation and stress nephograms of bracket can be obtained, which prove that the bracket satisfied the requirements of stiffness and strength. Finally, for alternating cycle load of the subway gear box bracket, the life of bracket can be estimated by making use of stress testing data in the paper, and it can privide a certain basis for preestimate maintenance and failure prediction.
Keywords:gear box bracket  strength analysis  fatigue life
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号