| WC含量对超细Ti(C,N)基金属陶瓷组织和性能的影响 |
| |
| 引用本文： | 金之铂,刘宁,詹斌,李其龙. WC含量对超细Ti(C,N)基金属陶瓷组织和性能的影响[J]. 硬质合金, 2010, 27(5): 269-273. DOI: 10.3969/j.issn.1003-7292.2010.05.003 |
| |
| 作者姓名： | 金之铂 刘宁 詹斌 李其龙 |
| |
| 作者单位： | 合肥工业大学材料科学与工程学院; |
| |
| 摘 要： | 采用真空烧结法制备超细Ti(C,N)基金属陶瓷,研究WC含量0wt%～20wt%对超细Ti(C,N)基金属陶瓷显微组织和力学性能的影响。通过SEM观察组织形貌发现,添加WC后金属陶瓷的组织出现了典型的芯壳结构,并且芯壳产生了明显细化,但当WC添加量超过15wt%时,环形相碳化物粗化、变脆。伴随着WC添加量,抗弯强度、硬度、断裂韧性均呈现先上升再下降的趋势。在WC添加量15wt%时,抗弯强度达到1262MPa,维氏硬度值达到16.3HV,金属陶瓷的综合力学性能达到最优。
|
| 关 键 词： | Ti(C,N)基金属陶瓷 WC 显微组织 力学性能 |
Influence of WC Content on Microstructure and Mechanical Properties of Ultrafine Ti(C,N)-based Cermet |
| |
| Jin Zhibo,Liu Ning,Zhan Bin,Li Qilong. Influence of WC Content on Microstructure and Mechanical Properties of Ultrafine Ti(C,N)-based Cermet[J]. Cemented Carbide, 2010, 27(5): 269-273. DOI: 10.3969/j.issn.1003-7292.2010.05.003 |
| |
| Authors: | Jin Zhibo Liu Ning Zhan Bin Li Qilong |
| |
| Affiliation: | Jin Zhibo Liu Ning Zhan Bin Li Qilong(College of Material Science and Engineering,Hefei University of Technology,Hefei Anhui 230009,China) |
| |
| Abstract: | The ultrafine Ti(C,N)-based cermet were produced by vacuum sintering technology.The influence of WC content from 0wt% to 20wt% on the microstructure and mechanical properties of the Ti(C,N)-based cermet was studied.The microstructure was analyzed by scanning electron microscope(SEM).The ultrafine Ti(C,N)-based cermet presents a typical core/rim structure and the core/rim structure is obviously refined.But when the addition of WC exceeds 15wt%,the surrounding phase becomes coarse and brittle.The bending stre... |
| |
| Keywords: | Ti(C N)-based cermet WC microstructure mechanical properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
