基于遗传算法的TC21钛合金高速车削工艺优化研究 |
| |
引用本文: | 张莉英,纪煦,蒋放.基于遗传算法的TC21钛合金高速车削工艺优化研究[J].机床与液压,2018,46(10):26-28. |
| |
作者姓名: | 张莉英 纪煦 蒋放 |
| |
作者单位: | 北华航天工业学院机电工程学院 |
| |
基金项目: | 河北省高校先进制造技术与生产过程自动化应用技术研发中心资助项目(ZDKY-2011-01 |
| |
摘 要: | 通过TC21钛合金车削正交实验,测量表面粗糙度,基于响应曲面原理建立表面粗糙度预测模型,并以最大材料去除率为优化目标,采用遗传算法对不同表面粗糙度下的TC21钛合金高速车削参数进行优化,以期对生产实践起到一定的指导作用。
|
关 键 词: | 遗传算法 TC21钛合金 高速车削 工艺优化 |
Study on Optimization of TC21 Titanium Alloy High Speed Turning Process Based on Genetic Algorithm |
| |
Abstract: | The surface roughness was measured by orthogonal test of TC21 titanium alloy,and the surface roughness prediction model was established based on response surface theory.With the maximum material removal rate as the optimization target,the high speed turning parameters of TC21 titanium alloy with certain surface roughness were optimized by using genetic algorithm and the production process was optimized,with a view to play a guiding role in production practice. |
| |
Keywords: | Genetic algorithm TC21 titanium alloy High speed turning Process optimization |
本文献已被 CNKI 等数据库收录! |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|