| 叶轮高速开粗加工路径优化设置研究 |
| |
| 引用本文： | 肖善华. 叶轮高速开粗加工路径优化设置研究[J]. 机床与液压, 2018, 46(2): 49-53 |
| |
| 作者姓名： | 肖善华 |
| |
| 作者单位： | 宜宾职业技术学院; |
| |
| 摘 要： | 分析叶轮五轴数控加工刀具路径优化及NURBS曲面优化算法,应用MasterCAM X6软件中的叶轮专家系统,完成叶轮的高速五轴开粗加工优化参数设置,模拟仿真得到无碰撞、无过切的五轴叶轮开粗刀路轨迹。经实际切削验证,得到开粗的叶轮。
|
| 关 键 词： | MasterCAM X6软件；叶轮专家系统；叶轮粗加工 |
Research on Impeller High-speed Roughing Machining Path Optimization Setting |
| |
| Abstract: | Five-axis NC machining path optimization of impeller and the NURBS surface optimization algorithm were analyzed.The expert system in MasterCAM X6 software was applied to complete high-speed five-axis rough machining optimized parameter setting.No collision, no past five axial impeller rough machining path trajectory was gotten.By the actual cutting, a coarse impeller was gotten. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|
