首页 | 本学科首页   官方微博 | 高级检索  
     

基于高速开关阀的液压马达调速系统研究
引用本文:邱涛,贺兴亮,杨士敏,陈宏业. 基于高速开关阀的液压马达调速系统研究[J]. 机床与液压, 2018, 46(1): 80-86
作者姓名:邱涛  贺兴亮  杨士敏  陈宏业
作者单位:长安大学工程机械学院;
摘    要:介绍了一种由高速开关阀控插装阀对负载流量进行调节的液压马达调速系统,从电子系统与液压系统数学模型相似性原理的角度,建立了液压马达调速系统的数学模型,说明了其调速原理,分析了其调速性能的影响因素,并提出了各液压元件参数合理匹配的方法。最后,通过对马达调速系统的设计与仿真分析,验证了参数匹配的合理性及各参数的不同选择对调速性能的影响,结果表明:调速系统响应快,调速范围宽,但低占空比下的节流损失较大,应尽量保证其在高占空比条件下工作。

关 键 词:高速开关阀; 插装阀;调速系统;参数匹配;仿真

Study on Speed Control System for Hydraulic Motor Based on a High-speed On/Off Valve
Abstract:A speed control system for hydraulic motor is introduced,whose flow was adjusted through cartridge valve which controlled by the high speed on/off valve.Its mathematical model based on the similar theory between the electronic and hydraulic system in the mathematical model was established to illustrate its speed control principle and to analyze the influence factors of speed controlling performance.A reasonable method to match every component parameter was put forward.In the end with the design and simulation analysis of the speed control system,the rationality of parameter matching and the different speed controlling performance with different parameter were verified.The conclusion shows:Speed control system with fast response,wide speed range has a large throttle loss under the low duty cycle,it should be ensured to work at the high duty cycle condition as far as possible.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《机床与液压》浏览原始摘要信息
点击此处可从《机床与液压》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号