| 油气润滑三维结构ECT传感器电容极板优化设计 |
| |
| 引用本文： | 宋春良,孙启国. 油气润滑三维结构ECT传感器电容极板优化设计[J]. 计算机测量与控制, 2022, 30(2): 314-320. DOI: 10.16526/j.cnki.11-4762/tp.2022.02.045 |
| |
| 作者姓名： | 宋春良 孙启国 |
| |
| 作者单位： | 北方工业大学机械与材料工程学院,北京 100144 |
| |
| 基金项目： | 北京市属高等学校人才强教深化计划项(PHR201107109) |
| |
| 摘 要： | 针对小管径油气润滑ECT系统中传感器存在的重建图像轴向分辨率过低、采集信号微弱等问题,建立了该系统ECT电容传感器的三维结构优化模型,确定了电容极板间隔、单层电容极板长度和电容极板厚度3个重要结构参数的初值范围,采用正交实验的方法对传感器电容极板结构参数进行了优化;研究结果表明,优化后的传感器图像精度系数提高了131.20%。
|
| 关 键 词： | 油气润滑 三维ECT 电容极板结构参数 优化设计 图像精度 |
| 收稿时间： | 2021-08-15 |
| 修稿时间： | 2021-09-12 |
Optimal Design of Capacitor Plate of Oil-air Lubricated Three-dimensional ECT Sensor |
| |
| SONG Chunliang,SUN Qiguo,CHANG Zongkui. Optimal Design of Capacitor Plate of Oil-air Lubricated Three-dimensional ECT Sensor[J]. Computer Measurement & Control, 2022, 30(2): 314-320. DOI: 10.16526/j.cnki.11-4762/tp.2022.02.045 |
| |
| Authors: | SONG Chunliang SUN Qiguo CHANG Zongkui |
| |
| Affiliation: | (Mechanical and Materials Engineering College,North China University of Technology,Beijing 100144,China) |
| |
| Abstract: | In order to solve the problems, such as low axial resolution of the sensor reconstruction image and weak acquisition signal, existing in the small diameter oil-air lubrication ECT system, a three-dimensional structure optimization model of the ECT capacitive sensor of the system is established. The initial values range of the spacing of capacitor plate, the length of single-layer capacitor plate and the thickness of capacitor plate are determined. Three important structural parameters mentioned above is optimized by the orthogonal experiment method. The research results show that the image accuracy coefficient of the optimized sensor is increased by 131.20%. |
| |
| Keywords: | oil-air lubrication three-dimensional ECT capacitance plate structure parameters optimized design image accuracy |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《计算机测量与控制》浏览原始摘要信息 |
|
点击此处可从《计算机测量与控制》下载免费的PDF全文 |
