首页 | 本学科首页   官方微博 | 高级检索  
     

钾对低温耐硫变换催化剂的影响
引用本文:田大勇,蒋明哲,邓甜音,赵华博,孙守理. 钾对低温耐硫变换催化剂的影响[J]. 工业催化, 2016, 24(12): 42-45. DOI: 10.3969/j.issn.1008-1143.2016.12.007
作者姓名:田大勇  蒋明哲  邓甜音  赵华博  孙守理
作者单位:北京低碳清洁能源研究所,北京 102209
摘    要:采用不同钾源制备低温耐硫变换催化剂Mo-Co-K/Al_2O_3,通过XRD、N_2吸附-脱附法和微反评价等研究钾源对催化剂的钾流失率、孔结构及反应过程中钾硫酸盐化的影响。结果表明,以K_2SO_4为钾源的催化剂钾流失率最大,活性最低。KNO_3和KOH对拟薄水铝石的胶溶能力较强,易形成小孔径结构的催化剂。K_2SiO_3可以有效避免催化剂中钾在反应过程中的硫酸盐化。

关 键 词:催化剂工程  钾流失  耐硫变换催化剂  硫酸盐化  

Effects of potassium on the low temperature sulfur-tolerant water-gas-shift catalyst
Tian Dayong,Jiang Mingzhe,Deng Tianyin,Zhao Huabo,Sun Shouli. Effects of potassium on the low temperature sulfur-tolerant water-gas-shift catalyst[J]. Industrial Catalysis, 2016, 24(12): 42-45. DOI: 10.3969/j.issn.1008-1143.2016.12.007
Authors:Tian Dayong  Jiang Mingzhe  Deng Tianyin  Zhao Huabo  Sun Shouli
Affiliation:National Institute of Clean-and-Low-Carbon Energy,Beijing 102209,China
Abstract:Mo-Co-K/Al2O3 low temperature sulfur-tolerant water-gas-shift catalysts were prepared by using different K sources.The effects of K sources on K leaching and pore structure of the catalysts and K sulfation during the reaction were investigated by XRD,N2 adsorption-desorption and catalyst evaluation.The results showed that the catalyst prepared by using K2SO4 as K source possessed the highest K leaching and the lowest activity.KNO3 and KOH exhibited stronger ability to peptize the pseudo-boehmite,which resulted in the formation of the catalyst with smaller pore structure.K2SiO3 could effectively avoid the sulfation of potassium in the catalyst during the reaction.
Keywords:catalyst engineering  K leaching  sulfur-tolerant water-gas-shift catalyst  sulfation  
本文献已被 CNKI 等数据库收录!
点击此处可从《工业催化》浏览原始摘要信息
点击此处可从《工业催化》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号