| Q345厚板表面辊印成因分析与改进措施 |
| |
| 引用本文： | 沈敏,李磊,罗永恒. Q345厚板表面辊印成因分析与改进措施[J]. 轧钢, 2016, 33(5): 75-77 |
| |
| 作者姓名： | 沈敏 李磊 罗永恒 |
| |
| 作者单位： | 柳州钢铁股份有限公司中板厂，广西柳州545002 |
| |
| 摘 要： | 针对厚规格Q345钢板（h>30 mm）表面存在辊印的问题，分析得出钢板尾部下扣是该缺陷产生的主要原因。通过对加热温度、末道次压下量、咬钢速度、轧制速度、雪橇档位控制等方面实施改进后，钢板表面辊印缺陷明显减少。
|
| 关 键 词： | 关键词：厚规格Q345钢板 辊印 尾部下扣 末道次压下量 咬钢速度 轧制速度 雪橇档位 |
| 收稿时间： | 2015-10-20 |
Causes analysis and improvement measures of surface roll marks on Q345 heavy plate |
| |
| SHEN Min,LI Lei,LUO Yong-heng. Causes analysis and improvement measures of surface roll marks on Q345 heavy plate[J]. Steel Rolling, 2016, 33(5): 75-77 |
| |
| Authors: | SHEN Min LI Lei LUO Yong-heng |
| |
| Affiliation: | Plate Factory,Liuzhou Iron & Steel Co.,Ltd.,Liuzhou 545002,China |
| |
| Abstract: | The roll marks defect on the surface of Q345 heavy plate with thickness above 30 mm was analyzed,and the cause was turned to be the plate tail crook down.Some measures were taken into practice,including the optimization of heating temperature,last pass reduction,biting speed,rolling speed,sled gear control and other aspects,the roll marks were avoided obviously. |
| |
| Keywords: | Keywords: thick Q345 plate surface roll marks down crook of steel tail late pass reduction biting speed rolling speed sled gear |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《轧钢》浏览原始摘要信息 |
|
点击此处可从《轧钢》下载全文 |
|
