首页 | 本学科首页   官方微博 | 高级检索  
     

高拱坝表孔宽尾墩水力特性试验研究
引用本文:李乃稳,许唯临,刘超,邓军.高拱坝表孔宽尾墩水力特性试验研究[J].水力发电学报,2012,31(2):56-61.
作者姓名:李乃稳  许唯临  刘超  邓军
作者单位:1. 四川大学水力学与山区河流开发保护国家重点实验室,成都610065/四川大学水利水电学院,成都610065
2. 四川大学水力学与山区河流开发保护国家重点实验室,成都,610065
3. 四川大学水利水电学院,成都,610065
基金项目:国家自然科学基金青年科学基金项目(50909067,51009102);新世纪优秀人才支持计划(NCET-10-0589);四川大学青年科学研究基金项目(校青2008043)
摘    要:采用模型试验方法,对宽尾墩消能工应用于高拱坝表孔后,其下泄水流流态、泄流能力、水垫塘流态及水垫塘底板冲击动压等水流特性进行了研究。结果表明:高拱坝表孔宽尾墩流道内存在自由跌流、急流冲击波及缓流三种流态;当处于急流冲击波流态时,其下泄水舌呈窄而高且长的窄长流态,水舌纵向扩散效果明显,并且宽尾墩体型几何参数变化不会影响其泄流能力;水垫塘底板最大时均冲击动压值随着堰顶水头的增高而增大,随着宽尾墩收缩比的增加而增大,随着墩尾折角的增大而减小,随着坝面倾角的增大而减小。

关 键 词:水力学  水力特性  模型试验  高拱坝  泄洪消能  宽尾墩

Experimental study on hydraulic characteristics of flaring gate piers of surface spillway in the high arch dam
LI Naiwen,XU Weilin,LIU Chao,DENG Jun.Experimental study on hydraulic characteristics of flaring gate piers of surface spillway in the high arch dam[J].Journal of Hydroelectric Engineering,2012,31(2):56-61.
Authors:LI Naiwen  XU Weilin  LIU Chao  DENG Jun
Affiliation:1(1.State Key Lab.of Hydraulics and Mountain River Eng.,Sichuuan University.,Chengdu 610065; 2.College of Hydraulic & Hydroelectric Engineering,Sichuuan University.,Chengdu 610065)
Abstract:In this paper,the hydraulic characteristics of flaring gate piers applied to the surface spillway in a high arch dam were studied on a physical model,such as plunging stream flow pattern,discharge capability,flow pattern and time averaged impact pressure on the plunge pool bottom etc.The results showed that there were three flow patterns as free drop,shock wave and slow flow in the channel of flaring gate piers on the surface spillway.When the flow pattern of flaring gate piers channel was shock wave,the narrow and long jet could be gotten,and the change of flaring piers parameters did not have any effect on the discharge capability of surface spillway.And the bigger the water head of weir is,the bigger the maximum time averaged impact pressure on the pool bottom is.The bigger the contracting scale of flaring piers is,the bigger the maximum time averaged impact pressure is.As while,the bigger the deflection angle of pier’s tail and plunging angle of the channel bottom of spillway are,the smaller the maximum time averaged impact pressure is.
Keywords:hydraulics  hydraulic characteristics  physical model  high arch dam  flood discharge and energy dissipation  flaring gate piers
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号