| 铝高速钢滚切中硬齿面的试验研究 |
| |
| 引用本文： | 全玉璋,李芳,王常英,宋云龙. 铝高速钢滚切中硬齿面的试验研究[J]. 吉林大学学报(工学版), 1990, 0(4) |
| |
| 作者姓名： | 全玉璋 李芳 王常英 宋云龙 |
| |
| 作者单位： | 吉林工业大学机械工程系(全玉璋，李芳，王常英)，吉林工业大学机械工程系(宋云龙) |
| |
| 摘 要： | 本文用我国研制的高性能铝高速钢(W_6Mo_5Cr_4V_2Al)进行了滚切中硬齿面(小于HRC45)的试验研究。初步结果表明:它完全可用来滚切HRC40左右的中硬齿面,而一般高速钢(W_6Mo_5Cr_4V_2)则因磨损值过大且有明显的塑性变形而无法胜任。
|
| 关 键 词： | 铝高速钢(W_6Mo_5Cr_4V_2Al) 滚齿 |
Experimental Investigation of Gear Hobbing about Medium Quenched Profiles with Aluminium High-speed Steel |
| |
| Quan Yuzhang,Li Fang,Wang Changying and Song Yunlong. Experimental Investigation of Gear Hobbing about Medium Quenched Profiles with Aluminium High-speed Steel[J]. Journal of Jilin University:Eng and Technol Ed, 1990, 0(4) |
| |
| Authors: | Quan Yuzhang Li Fang Wang Changying Song Yunlong |
| |
| Abstract: | The writer did experimental investigation of gear hobbing about medium quenched profiles ( less than HRC45 ) with the high-perfommance aluminium high-speed steel (W6Mo5Cr4Al). The result of experiment intecates: the aluminium high-speed steel is entirely possible to be used in gear hobbing on medium quenched profiles which has HRC40 or so, but ordinary high-speed steel is impossible because the wear is excessive and plastic deformation is ob-vions. |
| |
| Keywords: | aluminium high-speed stell (W6Mo5Cr4V2Al) gear hobbing |
| 本文献已被 CNKI 等数据库收录！ |
