首页 | 本学科首页   官方微博 | 高级检索  
     

二流中间包内型优化的水模实验研究
引用本文:孔章情,孔辉,周俐,徐其言.二流中间包内型优化的水模实验研究[J].安徽工业大学学报,2011(1):4-7.
作者姓名:孔章情  孔辉  周俐  徐其言
作者单位:安徽工业大学冶金与资源学院;
基金项目:安徽省教育厅自然科学基金重点项目(KJ2008A018)
摘    要:通过水力学模拟和正交实验方法,采用挡墙和挡坝的控流装置,优化二流中间包的流场.采用正交分析方法优化出最佳方案,得出优化后的中间包示踪剂响应时间从17s提高到48 s,平均停留时间从240 s增加到427 s,中间包死区体积比也从48.0%减少到7.5%.

关 键 词:中间包  水模  正交实验  流场

Study on the Water Modeling to Optimize the Tundish inside Shape of 2-stand Billet Tundish
KONG Zhang-qing,KONG Hui,ZHOU Li,XU Qi-yan.Study on the Water Modeling to Optimize the Tundish inside Shape of 2-stand Billet Tundish[J].Journal of Anhui University of Technology,2011(1):4-7.
Authors:KONG Zhang-qing  KONG Hui  ZHOU Li  XU Qi-yan
Affiliation:KONG Zhang-qing,KONG Hui,ZHOU Li,XU Qi-yan (School of Metallurgy and Resources,Anhui University of Technology,Ma'anshan 243002,China)
Abstract:The appropriate partition walls and partition dams are used to control the fluid flow in the 2-strand billet tundish.And their positions are optimized by means of water modeling and orthogonal tests.After optimization,the reactive time for tracer agent increases from 17 s to 48 s,and the average residence time increases from 240 s to 427 s.Furthermore,the dead volume decreases from 48.0%to 7.5%.
Keywords:tundish  water modeling  orthogonal tests  flow field  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号