| 多孔阳极氧化铝模板制备工艺的研究 |
| |
| 引用本文： | 张少波,郭敏,赵琢,吴思达,杨全红.多孔阳极氧化铝模板制备工艺的研究[J].电镀与精饰,2009,31(11). |
| |
| 作者姓名： | 张少波 郭敏 赵琢 吴思达 杨全红 |
| |
| 作者单位： | 1. 天津大学,化工学院,天津,300072
2. 天津出入境检验检疫局,天津,300019 |
| |
| 摘 要： | 以硫酸溶液为电解液,采用二次阳极氧化工艺制备高度有序的多孔阳极氧化铝模板.研究了电解液浓度、阳极氧化电压和阳极氧化温度对多孔阳极氧化铝模板形貌、孔径和孔间距的影响,并以高氯酸和丙酮的混合溶液为电解液,利用第三次阳极氧化,一步实现了多孔阳极氧化铝膜的通孔剥离,获得具有较大面积、韧性较好的通孔多孔阳极氧化铝模板.
|
| 关 键 词： | 氧化铝模板 二次阳极氧化 三次阳极氧化 剥离 通孔 |
Preparation Technology of Porous Anodic Aluminum Oxide Template |
| |
| ZHANG Shao-bo,GUO Min,ZHAO Zhuo,WU Si-da,YANG Quan-hong.Preparation Technology of Porous Anodic Aluminum Oxide Template[J].Plating & Finishing,2009,31(11). |
| |
| Authors: | ZHANG Shao-bo GUO Min ZHAO Zhuo WU Si-da YANG Quan-hong |
| |
| Affiliation: | ZHANG Shao-bo1,GUO Min1,ZHAO Zhuo2,WU Si-da1,YANG Quan-hong1(1.School of Chemical Engineering and Technology,Tianjin University,Tianjin 300072,China,2.Tianjin Entry-exit Inspection and Quarantine Bureau 300019,China) |
| |
| Abstract: | Ordered porous anodic aluminum oxide templates were prepared by a two-step anodization approach where sulfuric acid solution was employed as an electrolyte.The influence of concentration of electrolyte,anodic voltage and employed temperature on the AAO template was investigated in details.Through-hole AAO templates with large area and flexible texture were obtained directly only by a third-step anodization where a mixed solution of perchloric acid and acetone was employed as an electrolyte. |
| |
| Keywords: | aluminum oxide template two-step anodic oxidization third anodic oxidization detachment through-hole |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
