| 成膜温度对漆膜表面形态的影响 |
| |
| 引用本文： | 孟晶,李效玉. 成膜温度对漆膜表面形态的影响[J]. 涂料工业, 2005, 35(4): 1-4 |
| |
| 作者姓名： | 孟晶 李效玉 |
| |
| 作者单位： | 北京化工大学材料科学与工程学院,100029 |
| |
| 摘 要： | 采用种子乳液法合成了核壳结构苯丙乳液，用原子力显微镜(AFM)对不同成膜温度漆膜表面形态，尤其是乳化剂在漆膜表面的分布进行了研究。发现控制乳液的成膜温度略高于Tg，可以得到粒子排列整齐的均一膜，膜的耐水性等性能更好。
|
| 关 键 词： | 成膜温度 表面形态 原子力显微镜（AFM） 漆膜 种子乳液法 苯丙乳液 核壳结构 膜表面 乳化剂 耐水性 Tg |
| 文章编号： | 0253-4312(2005)04-0001-04 |
| 修稿时间： | 2004-11-30 |
Influence of Film Forming Temperature on Surtace Morphology of Paint Film |
| |
| MENG Jing,LI Xiao-yu. Influence of Film Forming Temperature on Surtace Morphology of Paint Film[J]. Paint & Coatings Industry, 2005, 35(4): 1-4 |
| |
| Authors: | MENG Jing LI Xiao-yu |
| |
| Abstract: | A core - shell structure styrene/acrylic emulsion has been prepared by use of seed emulsion polymerization. The surface morphology of the paint film at different film forming temperature, especially the distribution of emulsifiers on film surface, are studied by use of atomic force microscope (AFM). It has shown that when the film temperature of emulsion is controlled higher than Tg, a uniform film can be obtained with better water resistance, etc. |
| |
| Keywords: | film forming temperature film surface morphology AFM emulsion preparation core - shell structure emulsion |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
