|
|||||
|
|
| 面向大批量制造的车间质量稳定性控制系统研究 | |
| 引用本文： | 隋鹏飞,王国栋,芮阳,唐文东,金伶,贾顺,唐任仲. 面向大批量制造的车间质量稳定性控制系统研究[J]. 机电工程, 2011, 28(3): 275-279 |
| 作者姓名： | 隋鹏飞 王国栋 芮阳 唐文东 金伶 贾顺 唐任仲 |
| 作者单位： | 1. 浙江大学现代制造工程研究所,浙江,杭州,310027 2. 浙江省汽车及零部件产业科技创新服务平台,浙江,杭州,310012 3. 浙江大学现代制造工程研究所,浙江,杭州,310027;浙江省汽车及零部件产业科技创新服务平台,浙江,杭州,310012 |
| 基金项目： | 浙江省科技计划重大科技专项资助项目 |
| 摘 要： | 针对大批量制造环境下,车间质量的不稳定、不合格率高、废品多等问题,构建了一种车间质量稳定性控制系统,并建立了该系统的工作原理和功能结构.该系统从车间过程质量和产品质最两方面来分析车间的质量稳定性状况.由于车间过程质量与产品质量之间关系的复杂性,提出了基于灰色系统理论的车间过程质量与产品质量的关联性分析方法.利用该方法,... |
| 关 键 词： | 车间过程质量 产品质量 灰色系统 关联性分析 |
Research on workshop quality stability control system for mass production |
|
| SUI Peng-fei,WANG Guo-dong,RUI Yang,TANG Wen-dong,JIN Ling,JIA Shun,TANG Ren-zhong. Research on workshop quality stability control system for mass production[J]. Mechanical & Electrical Engineering Magazine, 2011, 28(3): 275-279 | |
| Authors: | SUI Peng-fei WANG Guo-dong RUI Yang TANG Wen-dong JIN Ling JIA Shun TANG Ren-zhong |
| Affiliation: | SUI Peng-fei1,WANG Guo-dong1,RUI Yang2,TANG Wen-dong1,JIN Ling1,JIA Shun1,TANG Ren-zhong1,2 (1.Institute of Modern Manufacturing Engineering,Zhejiang University,Hangzhou 310027,China,2.Science & Technology Innovation Service Platform for Automobile & Auto-part of Zhejiang Province,Hangzhou 310012,China) |
| Abstract: | Under the circumstance of mass production,in order to solve the problems,such as the unstability of the workshop quality,high percent defective and more wastes,the workshop quality stability control system was put forward.The principle and the functions of the system were constructed.In this system,the workshop quality stability was analyzed from the view of workshop process quality and product quality.Because of the complexity of relationship between workshop process quality and product quality,the method ... |
| Keywords: | workshop process quality product quality grey system association analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |