| 高速经编机电子送经控制系统的设计 |
| |
| 引用本文： | 田宁波,袁嫣红,张建义,金犁. 高速经编机电子送经控制系统的设计[J]. 机电工程, 2011, 28(2): 188-190,194 |
| |
| 作者姓名： | 田宁波 袁嫣红 张建义 金犁 |
| |
| 作者单位： | 浙江理工大学教育部现代纺织装备技术工程研发中心,浙江,杭州,310018 |
| |
| 基金项目： | 国家科技支撑计划资助项目,浙江省自然科学基金资助项目 |
| |
| 摘 要： | 为了保证经编机在高速运转下送经量的恒定,运用当今经编机电子送经系统中最常见的送经原理,即利用反馈信号构建闭环控制系统,从而实现了同一送经量下以恒定线速度进行反馈控制,设计了一种基于高级精简机器指令(ARM)和现场可编程门阵列(FPGA)控制的高速经编机电子送经控制系统,并运用了PID控制理论.研究结果表明,该系统能实现...
|
| 关 键 词： | 经编机 电子送经 高级精简机器指令 现场可编程门阵列 比例-积分-微分 |
Design of electronic let-off control system of high-speed warp knitting machine |
| |
| TIAN Ning-bo,YUAN Yan-hong,ZHANG Jian-yi,JIN Li. Design of electronic let-off control system of high-speed warp knitting machine[J]. Mechanical & Electrical Engineering Magazine, 2011, 28(2): 188-190,194 |
| |
| Authors: | TIAN Ning-bo YUAN Yan-hong ZHANG Jian-yi JIN Li |
| |
| Affiliation: | TIAN Ning-bo,YUAN Yan-hong,ZHANG Jian-yi,JIN Li(Modern Textile Equipment and Technology Engineering Research Center of Ministry of Education,Zhejiang Sci-Tech University,Hangzhou 310018,China) |
| |
| Abstract: | In order to ensure warp knitting machine sent stably in the high-speed cases,the most common principle of constructing closed-loop system today was applied to achieve the task of feedback controlling on the condition of same amount of warp run-in and constant linear velocity.A kind of electronic warp let-off system based on advanced RISC machines(ARM) and field-programmable gate array(FPGA)-controlled was established.And the PID control theory was used.The results indicate that the system can achieve the go... |
| |
| Keywords: | warp knitting machine electronic warp let-off system advanced RISC machine(ARM) field-programmable gate array(FPGA) proportim-integration-differentiation(PID) |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
