| 面向电极加工的数控自动编程系统的开发 |
| |
| 引用本文： | 杨晓琴,陶建华,刘晓初,朱明英. 面向电极加工的数控自动编程系统的开发[J]. 机床与液压, 2011, 39(6). DOI: 10.3969/j.issn.1001-3881.2011.06.002 |
| |
| 作者姓名： | 杨晓琴 陶建华 刘晓初 朱明英 |
| |
| 作者单位： | 广州大学机电学院,广东广州,510006 |
| |
| 基金项目： | 广州经济技术开发区重点科技攻关计划项目 |
| |
| 摘 要： | 针对PowerMILL加工电极模型时存在的编程效率低、重复劳动多、编程质量参差不齐、优秀编程工艺不易保存等问题,应用PowerMILL的二次开发接口技术以及宏录制功能,建立了关系完善的系统数据库和独立性强的系统功能模块,在VB.NET环境下,创建了能够保存优秀编程经验、完成高质量编程的数控自动编程系统.试验结果表明:该系统能将编程效率提高2～2.5倍,节省了大量编程时间,同时有效地避免了编程资源的流失.
|
| 关 键 词： | PowerMILL软件 电极 数控编程 二次开发 |
Development of Automatic NC Programming System for Machining Module Electrode |
| |
| YANG Xiaoqin,TAO Jianhua,LIU Xiaochu,ZHU Mingying. Development of Automatic NC Programming System for Machining Module Electrode[J]. Machine Tool & Hydraulics, 2011, 39(6). DOI: 10.3969/j.issn.1001-3881.2011.06.002 |
| |
| Authors: | YANG Xiaoqin TAO Jianhua LIU Xiaochu ZHU Mingying |
| |
| Affiliation: | YANG Xiaoqin,TAO Jianhua,LIU Xiaochu,ZHU Mingying(Institute of Electrical and Mechanical,Guangzhou University,Guangzhou Guangdong 510006,China) |
| |
| Abstract: | Aiming at the problems in PowerMILL electrode-model machining,such as:low efficiency,duplication of effort,discordant quality in programming and the storage of good program was not easy and so on,a NC automatic programming system was set up which could save excellent programming experiences and finish high-level programs,by using PowerMILL secondary development interface and its macro recording function to build good-relationship system database and strong-independence system function modules under VB.NET e... |
| |
| Keywords: | PowerMILL software Electrode NC programming Secondary development |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
