| 牵引电机抱轴瓦镗瓦工艺及专用镗床设计 |
| |
| 引用本文： | 王威,孟广耀,韩小燕,刘松年.牵引电机抱轴瓦镗瓦工艺及专用镗床设计[J].机床与液压,2011,39(2). |
| |
| 作者姓名： | 王威 孟广耀 韩小燕 刘松年 |
| |
| 作者单位： | 青岛理工大学机械工程学院,山东青岛,266033 |
| |
| 摘 要： | 拟定牵引电机抱轴瓦镗瓦工艺流程,并详细设计与制定牵引电机抱轴瓦镗瓦工序内容.设计开发了镗削抱轴轴瓦加工的专用机床,采用顶针作为镗削电机抱轴轴瓦的主要定位夹紧装置,导向自定位装置用来提高单刃镗刀的轴向刚度和定位精度,选取合适的动力头、液压滑台和直线导轨来完成镗削的进给运动.
|
| 关 键 词： | 牵引电机抱轴瓦 镗削加工 工艺规程 定位夹紧 工序设计 |
Traction Motor Bearing Hold and Boring Tile Technics and Special Boring Machine Design |
| |
| WANG Wei,MENG Guangyao,HAN Xiaoyan,LIU Songnian.Traction Motor Bearing Hold and Boring Tile Technics and Special Boring Machine Design[J].Machine Tool & Hydraulics,2011,39(2). |
| |
| Authors: | WANG Wei MENG Guangyao HAN Xiaoyan LIU Songnian |
| |
| Affiliation: | WANG Wei,MENG Guangyao,HAN Xiaoyan,LIU Songnian(School of Mechanical Engineering,Qingdao Technological University,Qingdao Shandong 266033,China) |
| |
| Abstract: | The traction motor bearing boring tile hold process was studied out,and the traction motor bearings hold the content boring tile process was designed and stipulated in detail.The shaft bushing boring of special machine tools was designed and developed.A thimble used in boring motor was adopted as the main shaft bearing positioning clamp device-oriented self-positioning device,and used to increase the single-edged knife boring axial stiffness and positioning accuracy,the appropriate power head,hydraulic slid... |
| |
| Keywords: | Hold traction motor bearing Boring CAPP Positioning clamp Process design |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
