| 基于Visual Basic6.0的浮阀塔软件设计 |
| |
| 引用本文： | 司海飞,吴恩,杨忠. 基于Visual Basic6.0的浮阀塔软件设计[J]. 机电工程, 2011, 28(2): 238-242 |
| |
| 作者姓名： | 司海飞 吴恩 杨忠 |
| |
| 作者单位： | 金陵科技学院机电工程学院,南京,211169 |
| |
| 基金项目： | 江苏省"六大人才高峰"资助项目(第五批)，江苏省高校自然科学基金资助项目，金陵科技学院科研基金资助项目 |
| |
| 摘 要： | 针对浮阀塔手工设计效率低、计算结果不精确等问题,结合可视化编程语言Visual Basic 6.0开发环境在机电系统软件开发中的优缺点,以手工设计方法与工程实践为基础,利用Visual Basic 6.0开发浮阀塔设计软件,实现了浮阀塔结构的快速设计,快速绘制浮阀塔板布阀图及负荷性能图,并能实现EXCEL表输出结构计算...
|
| 关 键 词： | Visual Basic 6.0 浮阀塔 布阀图 负荷性能图 |
Software design of float valve tower based on Visual Basic 6.0 |
| |
| SI Hai-fei,WU En,YANG Zhong. Software design of float valve tower based on Visual Basic 6.0[J]. Mechanical & Electrical Engineering Magazine, 2011, 28(2): 238-242 |
| |
| Authors: | SI Hai-fei WU En YANG Zhong |
| |
| Affiliation: | (Institute of Mechanical and Electrical Engineering,Jinling Institute of Technology,Nanjing 211169,China) |
| |
| Abstract: | Aiming at the low efficiency of float valve tower manual design and inaccuracy of its calculation results and on basis of manual design methods and engineering practice,combining the merits and demerits of development environment of the visual programming language（Visual Basic 6.0） in electromechanical system software development,Visual Basic 6.0 was used to develop float valve tower design software,which have already realized the rapid design of float valve tower and quick drawings of valve tray layout and capacity graph of valve tray as well as using the EXCEL to output structural calculation parameters and hydraulic calculation parameters.The results and applied analysis indicate that the designed Visual Basic 6.0 based on float valve tower has friendly interface,accurate calculation results.The software is available for engineering design or teaching,while the used methods and techniques have certain reference value for the development of other industrial utility software. |
| |
| Keywords: | Visual Basic 6.0 |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
