| 基于Wishbone总线片上传感器控制系统的设计 |
| |
| 引用本文： | 黄旺华,刘怡俊. 基于Wishbone总线片上传感器控制系统的设计[J]. 数字社区&智能家居, 2009, 0(31) |
| |
| 作者姓名： | 黄旺华 刘怡俊 |
| |
| 作者单位： | 广东纺织职业技术学院;广东工业大学; |
| |
| 基金项目： | 广东省自然科学基金项目:片上网络服务质量保证(QoS)关键技术的研究(07300421) |
| |
| 摘 要： | 该论文在对传统传感器节点结构的分析基础上,设计了一种基于Wishbone总线的传感器控制系统结构IP核,并在XilinxSpantan 3系列的FPGA芯片上进行了调试测试。论文首先设计了以SHT7X作为传感器模块和以CC2420作为无线通信模块的传感器节点控制系统架构,然后详细设计了系统各模块,包括MCU、各种接口模块和系统连接模块,这些模块均采用WISHBONE总线标准。最后对设计进行综合、实现和调试,结果显示该设计值占用了625个Slice,最高频率达78.740MHz。
|
| 关 键 词： | WISHBONE FPGA 片上系统 IP核 |
Design of Sensor Control System on Chip Based on Wishbone |
| |
| HUANG Wang-hua,LIU Yi-jun. Design of Sensor Control System on Chip Based on Wishbone[J]. Digital Community & Smart Home, 2009, 0(31) |
| |
| Authors: | HUANG Wang-hua LIU Yi-jun |
| |
| Affiliation: | HUANG Wang-hua1,LIU Yi-jun2(1.Guangdong Textile Polytechnic,Foshan 528041,China,2.Guangdong University of Technology,Guangzhou 510006,China) |
| |
| Abstract: | The paper has designed a sensor control system IP core based on the analysis of traditional sensor node structure,which is under WISHBONE standard.This IP core has been carried out in Xilinx's Spantan 3 series FPGA chip successfully.First of all the paper designs the sensor node control system frame,in which SHT7X is a sensor module and CC2420 is a wireless communication module,and then it inrtoduces the detaile design of sub modules,including the MCU,interface modules and the system connecte module,all the... |
| |
| Keywords: | WISHBONE FPGA SoC IP core |
| 本文献已被 CNKI 等数据库收录！ |
|
