| MC尼龙/钛酸钾晶须复合材料制备及其摩擦学性能研究 |
| |
| 引用本文： | 李长生,牟文斌,胡杰.MC尼龙/钛酸钾晶须复合材料制备及其摩擦学性能研究[J].工程塑料应用,2008,36(1):4-7. |
| |
| 作者姓名： | 李长生 牟文斌 胡杰 |
| |
| 作者单位： | 江苏大学材料学院,镇江,212013 |
| |
| 摘 要： | 为了考察和改善MC尼龙的吸水性对其摩擦学性能的影响,采用单体浇铸工艺制备了MC尼龙/钛酸钾晶须复合材料。经干摩擦实验后发现,未水浴处理试样的摩擦系数易受吸水性的影响而不稳定,而水浴处理试样的摩擦系数则能较快地达到稳定;MC尼龙/钛酸钾晶须复合材料的磨损以磨粒磨损为主,纯MC尼龙则以粘着磨损为主,水浴处理试样的总质量磨损率要小于未水浴处理试样,但吸水性对材料磨损特性的影响并不明显;水浴处理MC尼龙/钛酸钾晶须复合材料能明显改善吸水性对摩擦学性能的影响。
|
| 关 键 词： | 钛酸钾晶须 MC尼龙 吸水性 摩擦磨损 |
| 收稿时间： | 2007-10-24 |
| 修稿时间： | 2007年10月24 |
PREPARATION AND TRIBOLOGY CAPABILITY OF POTASSIUM TITANATE WHISKERS REINFORCED MC NYLON |
| |
| Li Changsheng,Mu Wenbin,Hu jie.PREPARATION AND TRIBOLOGY CAPABILITY OF POTASSIUM TITANATE WHISKERS REINFORCED MC NYLON[J].Engineering Plastics Application,2008,36(1):4-7. |
| |
| Authors: | Li Changsheng Mu Wenbin Hu jie |
| |
| Abstract: | Potassium titanate(K_2Ti_6O_(13))whiskers reinforced monomer casting nylon is prepared by casting process to investigate the effects of absorbing moisture ability on tribology capability.The friction and wear test with dry condition shows that the friction coefficient of untreated samples become unstability because of absorbing moisture ability,the treated ones can get stability more easy.The main wear mechanism of potassium titanate whiskers reinforced samples are abrasive,while pure nylon ones are adhesive.The total mass wear ratio of the untreated sample is higher than that of treated one,but absorbing moisture ability can't affect the wear property obviously.The potassium titanate whiskers reinforced monomer casting nylon can mend friction and wear capability affected by absorbing water after being treated by boiled water. |
| |
| Keywords: | potassium titanate whiskers monomer casting nylon absorbing moisture ability frictional wear |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
