首页 | 本学科首页   官方微博 | 高级检索  
     

环氧树脂改性水性聚氨酯油墨连结料的合成与性能
引用本文:杜娟. 环氧树脂改性水性聚氨酯油墨连结料的合成与性能[J]. 涂料工业, 2012, 42(6): 41-44
作者姓名:杜娟
作者单位:宝鸡文理学院化学化工系,陕西宝鸡,721013
基金项目:宝鸡文理学院院级项目,陕西省重点实验室项目
摘    要:以聚酯多元醇、甲苯二异氰酸酯和二羟甲基丙酸为主要原料,采用环氧树脂改性制备出稳定的水性聚氨酯油墨连结料。水性油墨连结料的红外光谱分析说明合成了水性聚氨酯结构油墨连结料;差示扫描量热法测试表明环氧树脂复合改性增加了涂膜交联度,涂膜玻璃化转变温度(Tg)明显提高;粒径分布分析说明经过环氧树脂改性水性聚氨酯树脂的粒径分布变宽;热失质量分析说明环氧树脂改性增加了涂膜的耐热性;水性聚氨酯油墨性能测试说明水性油墨连结料PUIV-1的基本性能优于所用的水性丙烯酸连结料。

关 键 词:水性聚氨酯  油墨  连结料

Synthesis and Properties of Epoxy Resin Modified Waterborne Polyurethane Ink Vehicle
Du Juan. Synthesis and Properties of Epoxy Resin Modified Waterborne Polyurethane Ink Vehicle[J]. Paint & Coatings Industry, 2012, 42(6): 41-44
Authors:Du Juan
Affiliation:Du Juan(Department of Chemistry and Chemical Engineering,Baoji University of Arts and Sciences,Baoji,Shanxi 721013,China)
Abstract:A series of stable waterborne polyurethane ink vehicles have been prepared from toluene diisocyanate,polyester polyols and dimethylolpropionic acid and epoxy as modification resin.FT-IR analysis of waterborne polyurethane ink vehicle showed that waterborne polyurethane ink vehicle was prepared.Differential scanning calorimetric measurements of films tests showed that the crosslink degree and Tg of the films here improved greatly when epoxy resin was added.Particle size distribution analysis showed that waterborne polyurethane ink vehicle modified by epoxy resin was broaden.TG analysis showed that heat resistance of the films improved much when epoxy resin as modification agent.The properties test of waterborne polyurethane ink vehicle showed that PUIV-1 was better than waterborne acrylic vehicle.
Keywords:waterborne polyurethane  ink  vehicle
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号